manualshive.com logo in svg

S-COM 7K, Руководство пользователя, Страница: 226 / 400

Поделиться
Скачать
S-COM 7K Скачать руководство пользователя страница 226

7K 

•

 Chapter 16

16-8

Select From-Start-of-Transmission Timer

Allows controller to “disconnect” the DTMF decoder from a receiver

if it appears no DTMF command will be entered during a
transmission.

•

  The DTMF decoder is free to find another source of DTMF commands if the

current user does not enter a digit within 5 seconds from start of
transmission (See the 

Select DTMF Priority/Scan

 command on page 11-3).

•

  Reduces DTMF “falsing”, since the DTMF decoder only listens during the

beginning of the transmission.

•

  Enter one digit, 0 for OFF (disabled), 1 for ON (enabled).

Command Form:

Command

Form

Data Digit

Enable/Disable From-Start-of-Transmission
Timer for RX1

(PW) 63 64 x *

0 = OFF (disabled)
1 = ON (enabled)

Enable/Disable From-Start-of-Transmission
Timer for RX2

(PW) 63 65 x *

0 = OFF (disabled)
1 = ON (enabled)

Enable/Disable From-Start-of-Transmission
Timer for RX3

PW) 63 66 x *

0 = OFF (disabled)
1 = ON (enabled)

Acknowledgment: 

Sends OK

Errors:

Error

Meaning

? err 1

wrong number of digits entered

? err 2

illegal digit entered

Default Condition:

 From-Start-of-Transmission Timer is OFF (disabled) for all

receivers.

Examples:

If this feature is disabled, the receiver will feed the DTMF decoder for the
duration of the transmission (subject to its priority. (See the 

Select DTMF

Priority/Scan

 command on page 11-3).

If this feature is enabled, the receiver will feed the DTMF decoder for the first 5
seconds of the transmission (subject to its priority). If a user wishes to enter a
command and has already transmitted more than 5 seconds, he must unkey
and re-key before entering the command. Once a DTMF digit is entered, the
receiver will continue to feed the DTMF decoder for the remainder of the
transmission.

Содержание 7K

















































































































































































































































































































































































































Отзывы:

Нет отзывов