5
H.264 Network IP Camera User Manual
SECTION 2: INSTALLATION AND SETUP
SECTION 2
Installation and Setup
2.1 What’s in the box
Your camera includes the following:
•
BLK-IPS101 camera
•
Mounting ring
•
Cap for protecting the CCD
•
DC power adapter with power plugs for different powering sources
•
DC jack adapter cable
•
9-pin terminal block
•
Quick installation guide
•
Mounting adapter and screws for attaching the camera to a mounting bracket
•
Hex wrench
•
CD mini disk with application software, software manual, and camera manual (this document)
2.2 Tools you need
To install the camera, you will need:
•
Phillips #1 or #0 screwdriver
•
Mounting bracket
•
Compatible lens
•
PC with Microsoft
®
Windows
®
XP SP3 or newer
2.3 Find an IP address for your camera
Devices attached to an Local Area Network (LAN) are each assigned a unique address (IP address) that
they use when sending messages with each other. No two devices on a single Ethernet network can have
the same IP address. Otherwise, conflicts will occur.
Your IP camera is pre-configured with a static IP address, subnet mask, and gateway setting:
IP address:
192.168.0.100
Subnet mask: 255.255.255.0
Gateway:
192.168.0.1
