Take the New Top back off and introduce the S-Box
™
unit into its rebated hole.
Peel back the tape and place the custom top into position.
Using Tape allows you to have a few goes at getting the perfect position for the top before pressing it firmly
home and letting the tape adhesive to bond and cure.
Any final
“fine
-
tuning” of levels, if still required, can be
achieved by adjusting the male ball’s position so that
in
the closed (
catch-engaged
) position, your new top and adjacent surface are perfect. By twisting the threaded
ball part, and holding the top nut, the position of the ball can be raised or lowered by the tiniest of amounts.
STAGE 4 (Adding the new top)
Apply good quality double-sided
tape (e.g. 3M) to the plate
↗
½
”
13/16
”
