SA-4W-REPEATER
User Manual
9 SOFTWARE
UPDATE
9.1 General
The software of the S-Access boards has the possibility for field updates. To do a field update, you
need only a Windows 95/98/NT computer, the
Flash Loader
program installed, a connection
between the Windows computer and the repeater Monitor connector and the newest release of the
S-Access software.
Note:
The software has to be downloaded to the Main- and Upper board.
9.2 Software
download
To update the software on your repeater you have to run through the following steps:
1. Switch off the power of your repeater.
2. Connect the repeater monitor connector with your Windows computer’s RS232 interface.
3. Start the
Flash Loader
software on your Windows computer
4. Choose
Set Loader Communication
in the menu
Setting
. Select the right communication port,
the communication information and press
Ok
.
S-Access GmbH
Tel: +41 44 700 31 11
Oberhausenstrasse 47
Page
19
of
26
Fax: +41 44 700 31 03
8907 Wettswil a/A
Email:
Switzerland
WEB:
www.s-access.ch
