SA-4W-REPEATER
User Manual
S-Access GmbH
Tel: +41 44 700 31 11
Oberhausenstrasse 47
Page
18
of
26
Fax: +41 44 700 31 03
8907 Wettswil a/A
Email:
Switzerland
WEB:
www.s-access.ch
8.3.5.6 BASERATE
Command
This command sets the base rate for xDSL interface. This value must be between 3 and 32 and
defines the available 64 kbit/s channels. To optimize the bandwidth of your connection, you have to
set the base rate value to the maximum where you get a stable connection.
Parameters: 3
→
32
8.3.5.7 ADAPTIVE
Command
Set rate adaption on / off.
Parameters: on
off
8.3.5.8 DEFAULT
Command
The DEFAULT command sets a default configuration. Six default settings are available (three for
master, three for slave) in each of following modes: E1 only Normal or Dual Pair mode; Nx64 only
Normal or Dual Pair mode; fE1 &Nx64 Normal or Dual Pair mode and Multipoint Mode.
