Ryobi ZR51950A Скачать руководство пользователя

Страница: 7 / 28

Symbols

SERVICE

Servicing requires extreme care and knowledge and should

be performed only by a qualified service technician. For

service we suggest you return the product to your nearest

AUTHORIZED SERVICE CENTER

for repair. When

servicing, use only identical replacement parts.

WARNING:

To avoid serious personal injury, do not attempt

to use this product until you read thoroughly and

understand completely the operator’s manual. Save

this operator’s manual and review frequently for

continuing safe operation and instructing others who

may use this product.

The operation of any power tool can result in foreign objects being thrown into your

eyes, which can result in severe eye damage. Before beginning power tool operation,

always wear safety goggles or safety glasses with side shields and, when needed, a full

face shield. We recommend Wide Vision Safety Mask for use over eyeglasses or stan-

dard safety glasses with side shields. Always use eye protection which is marked to

comply with ANSI Z87.1.

WARNING:

SAVE THESE INSTRUCTIONS

The following signal words and meanings are intended to explain the levels of risk associated with this
product.

SYMBOL

SIGNAL

MEANING

DANGER:

Indicates an imminently hazardous situation, which, if not avoided, will

result in death or serious injury.

WARNING:

Indicates a potentially hazardous situation, which, if not avoided, could result

in death or serious injury.

CAUTION:

Indicates a potentially hazardous situation, which, if not avoided, may result

in minor or moderate injury.

CAUTION:

(Without Safety Alert Symbol) Indicates a situation that may result in property

damage.

Symbols

Содержание ZR51950A





























Результаты поиска

Содержание ZR51950A

Отзывы:

Похожие инструкции для ZR51950A

Бренды по названию

Популярные бренды

Ryobi ZR51950A, Руководство оператора

Результаты поиска

Содержание ZR51950A

Отзывы:

Похожие инструкции для ZR51950A

Бренды по названию

Популярные бренды