Ryobi ZR51950A Скачать руководство пользователя

Страница: 15 / 28

Converting From Trimmer To Brushcutter

Model No. ZR51990A

To convert from the trimmer to the brushcutter, remove the

trimmer head assembly, remove the grass deflector, attach

the brushcutter guard, and install the blade.

To Remove the Trimmer Head Assembly and Grass
Deflector

See Figures 10 and 11.

Follow these steps to remove the trimmer head assembly

and grass deflector.

Align the slot in the flanged washer with the slot in the

gear head.

Insert the head locking tool through the flanged washer

and gear head.

Remove the drive shaft and trimmer head assembly by

turning the drive shaft clockwise (left-handed threads).

Remove the flanged washer and retain it for the blade

installation.

Remove the screw securing the grass deflector.

Remove the grass deflector.

Note:

Store the trimmer head assembly parts together

for future use.

To Attach the Brushcutter Guard

See Figure 12.

Note:

To protect the operator, always be sure to attach the

brushcutter guard.
Follow these steps to attach the brushcutter guard.

Place the guard onto the gear head as shown.

Insert the three hex head screws from the bottom

through the guard into the gear head.

Tighten the screws securely and torque to 40-50 in.lb.

To Install the Blade

See Figure 13.

Follow these steps to install the blade.

Place flanged washer over the gear shaft with the

hollow side toward the brushcutter guard.

Center the blade on the flanged washer, making sure the

blade fits flat and the raised hub goes through the hole

in the blade.

Install the cupped washer with the raised center away

from the blade.

Place the blade nut onto the gear shaft.

Insert the head locking tool through the flanged washer

and gear head.

Install the blade nut by turning it counterclockwise

(left-handed threads).

Tighten the blade nut and torque to 120 in.lb. minimum

(finger tight plus 1/2 turn).

Figure 10

Figure 11

Figure 12

Figure 13

Assembly

Head

Locking

Tool

Gear

Head

Trimmer

Head

Assembly

Drive

Shaft

Flanged

Washer

Straight Shaft

Grass Deflector

Slot

Gear Head

Brushcutter

Guard

Hex Head

Screw

Brushcutter

Guard

Flanged

Washer

Blade

Blade Nut

Cupped

Washer

Gear Shaft

Содержание ZR51950A





























Результаты поиска

Содержание ZR51950A

Отзывы:

Похожие инструкции для ZR51950A

Бренды по названию

Популярные бренды

Ryobi ZR51950A, Руководство оператора

Результаты поиска

Содержание ZR51950A

Отзывы:

Похожие инструкции для ZR51950A

Бренды по названию

Популярные бренды