Ryobi XIW-3100, Руководство по эксплуатации для владельца

Страница: 5 / 8

4
This tool is started and stopped by depressing and releasing
the trigger (3).
The tool speed is variable from 0 through 2,200min
-1
by
controlling the trigger-squeezing force.
Insert the hex portion of the socket into the drive shank (1).
This tool is equipped with a LED work light (2) to illuminate the
tip of a bit. The light turns on by depressing the trigger.
1. Drive shank
2. LED work light
3. Trigger
4. Forward/Reverse switch
5. Battery clip
6. Battery pack (Not included)
1. Make sure that the tool is only connected to the voltage
marked on the name plate.
2. Never use the tool if its cover or any bolts are missing. If
the cover or bolts have been removed, replace them
prior to use.
Maintain all parts in good working order.
3. Always secure the tool when working in elevated
positions.
4. Never touch the blade, drill bit, grinding wheel or other
moving parts during use.
5. Never start the tool when its rotating component is in
contact with the work piece.
6. Never lay the tool down before its moving parts have
come to a complete stop.
7.
ACCESSORIES: The use of accessories or attachments
other than those recommended in this manual might
present a hazard.
8.
REPLACEMENT PARTS:
When servicing use only
identical replacement parts.
1. Be aware that since this tool does not have to be plugged
into an electrical outlet, it is always in operating condition.
2. First, charge the battery.
3. Be sure the battery holder is securely snapped in place.
4. When not in use, lock the trigger.
5. When operating at high places, be aware of things below
you.
6. Make sure that the bit is securely mounted. An incorrectly
mounted bit is extremely dangerous since it can fly off or
break during operating.
7. Do not wear cloth gloves or a necktie since they could
become caught in a rotating bit.
8. Hold the tool securely.
9. Never touch the metal body parts when fastening walls,
floors, or other surfaces covering electrical wiring.
Hold the tool only by the plastic handle to prevent electric
shocks.
INSTRUCTIONS FOR SAFE HANDLING
CORDLESS IMPACT WRENCH SAFETY
PRECAUTIONS
Li-ion batteries must be recycled.
Take the battery to the shop from which it was purchased as
soon as the post-charging battery life becomes too short for
practical use.
Do not discard the exhausted battery.
DISPOSAL OF THE EXHAUSTED BATTERY
DESCRIPTION
Drive shank size .................................................. 1/2” Hex.
Fastening capacity...................................... M14 - M32 bolt
Max.fastening torque ............................................ 310N.m
Motor ..................................................................... DC18V
No load speed .............................................. 0-2,200 min
-1
Impact per minute ......................................... 0-3,000 min
-1
Net weight (not incl. battery pack) ......................... 1.7 Kg
SPECIFICATIONS
COMPATIBLE BATTERY PACK AND CHARGER
TRIGGER (Fig. 1)
To change the direction of rotation, stop the tool by releasing
the trigger and push the forward/reverse switch (4) to the
opposite side. When the reversing switch is set to the “R”
mark, the direction of rotation will be clockwise when viewed
from the handle end of the drill. When the reversing switch is
set to the “L” mark, the direction of rotation will be
counter-clockwise.
The trigger can be locked by positioning the reversing switch
at the center. Lock the trigger whenever the tool is not in use.
Since the suitable tightening torque varies with the material,
size, and condition of the material into which objects are
tightened, use a tightening time which is appropriate for the
work conditions. Since bolts may be stretched or broken if the
tightening time is long, confirm the tightening time and
tightening torque before starting the work.
The tightening torque varies with the condition of the battery
pack. Since the striking force will become weaker, the striking
times will become fewer, and the tightening torque will
suddenly drop if the battery pack is on the verge of complete
discharge, recharge the battery pack at regular intervals.
FORWARD/REVERSE SWITCH (Fig.1)
LED WORK LIGHT (Fig.1)
Hex socket (Type : Quick change)
(Mounting)
To remove the socket, simply pull it off.
((Removing))
MOUNTING AND REMOVING THE SOCKET
(Fig. 2)
TIGHTENING TORQUE
BATTERY PACK (not included) ...... XB-1500, XB-3000
CHARGER (not included) ............... XPP-2700