6 — English
PRODUCT SPECIFICATIONS
Motor ..................................................................40 Volt DC
Maximum Pounds Per Square Inch* ....................1,500 PSI
KNOW YOUR PRESSURE WASHER
See Figure 1.
The safe use of this product requires an understanding of the
information on the product and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
AUTOMATIC DETERGENT INJECTION
SYSTEM
Pour detergent into the soap tank to apply detergent quickly
and easily to your cleaning project. Use of the soap nozzle
will activate the detergent injector at a 20:1 dilution ratio.
BOOST MODE
Boost mode provides an increase in water pressure for
tougher stain removal. Press the boost button to turn boost
mode on and off.
HOSE STORAGE
Once the high pressure hose is rolled, hang it on the back of
the machine using the hook-and-loop strap to secure in place.
ON/OFF SWITCH
This switch turns the pressure washer on and off.
SOAP TANK
Remove the cap from the soap tank to add detergent to the
pressure washer.
SIPHON HOSE
The siphon hose with filter gives the user complete portability
to pull water from any water source like a pool or a 5 gal.
bucket of water. It can also be attached to a garden hose
for a continuous water supply.
TOTAL STOP SYSTEM
The pressure washer is equipped with a power-saving feature
that causes the motor to stop whenever the trigger handle
trigger is released. The LED in the on/off switch will flash to
indicate the total stop system is active.
NOTE:
The fan will continue to run during total stop to keep
the product cool.
TRIGGER HANDLE
The trigger handle has a gripping surface that provides
added control of the spray wand and helps reduce fatigue.
TRIGGER WITH LOCK-OUT
Pulling the trigger releases a stream of water for high
pressure cleaning. The lock-out provides protection against
unauthorized use.
SYMBOLS
FEATURES
Maximum Gallons Per Minute ...............................1.2 GPM
*
Max. rating determined by PWMA Standard PW101
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter-
pretation of these symbols will allow you to operate the product better and safer.
SYMBOL
NAME
DESIGNATION/EXPLANATION
V
Volts
Voltage
no
No Load Speed
Rotational speed, at no load
.../min
Per Minute
Revolutions, strokes, surface speed, orbits etc., per minute
