background image

11 - English

FEATURES

KNOW YOUR CHAIN SAW

See Figure 5.

The safe use of this product requires an under-
standing of the information on the tool and in this 
operator’s manual as well as a knowledge of the 
project you are attempting. Before use of this prod-
uct, familiarize yourself with all operating features 
and safety rules.

CHN TENSIONING KNOB

This feature allows user to adjust the tension of 
the chain.

GUIDE BAR

The factory-equipped guide bar has a small radius 
tip that offers a somewhat lower kickback potential. 

LOW KICKBACK CHAIN

The low kickback chain helps minimize the force 
of a kickback reaction by preventing the cutters 
from digging in too deeply at the kickback zone. 

QUICK VIEW OIL INDICATOR

Semi-transparent oil reservoir that allows user to 
see when to add oil. 

SAFE-T-TIP

®

 ANTI-KICKBACK NOSE 

GUARD

The SAFE-T-TIP

®

 Anti-Kickback Nose Guard is an 

attach-ment provided on the end of the guide bar 
to prevent the chain on the end of the guide bar 
from contacting the wood.

LOCK-OUT BUTTON

A control feature designed to prevent the motor 
from being accidently started.

SWITCH TRIGGER

Squeeze the switch trigger to operate the unit after 
switch lock-out has been pushed in. Release the 
switch trigger to stop the unit.

ASSEMBLY

UNPACKING

This product has been shipped completely 

assembled.

 Carefully remove the product and any acces-

sories from the box. Make sure that all items 

listed in the packing list are included.

WARNING: 

Do not use this product if any parts on the Pack-
ing List are already assembled to your product 
when you unpack it. Parts on this list are not 
assembled to the product by the manufacturer 
and require customer installation. Use of a prod-
uct that may have been improperly assembled 
could result in serious personal injury.

 Inspect the product carefully to make sure no 

breakage or damage occurred during shipping.

 Do not discard the packing material until you 

have carefully inspected and satisfactorily oper-

ated the product.

  If any parts are damaged or missing, please call 

1-800-860-4050 for assistance.

PACKING LIST

Chain Saw with Scabbard
Bar and Chain Lubricant
Operator’s Manual

Содержание RY40500






























Отзывы: