Ryobi RY18BI150A, Руководство пользователя

Страница: 8 / 124

2
Original Instructions
Safety, performance, and dependability
have been given top priority in the design
of your battery inverter.
INTENDED USE
The product may be used for the
following purposes:
■ operating and charging USB-
powered devices
■ supplying electrical power for
operating compatible small
electronics such as cell phones,
tablets, laptops, LED lights, fans,
radios, etc.
The product is intended for indoor use
only.
When a battery pack is installed, the
product converts DC electricity to 230
V AC household power or 5 V DC USB
(up to 2.4 A) charging power, allowing
the user to charge and power a variety
of devices.
The product’s AC receptacle has
a non-sinusoidal output and is not
recommended for use with certain types
of sensitive electronics or electrical
devices containing a compressor. Refer
to the electronics’ Operator’s Manual.
The product is rated at 150 W power
output. Check the power rating of your
electrical device before using with the
product. Do not use the product if the
power rating of your electrical device
exceeds 150 W.
GENERAL SAFETY WARNINGS
Read and understand all instructions.
Failure to follow all instructions listed
below may result in electric shock,
fi re
and/or serious injury.
■ Save these instructions. Refer
to them frequently and use them
to instruct others who may use
this product. If you loan someone
the product, loan them these
instructions also.
■ Do not expose the product to rain,
wet, or damp conditions. Water
entering the product increases the
risk of electric shock.
■ Do not use the product if it has been
dropped or received a sharp blow. A
damaged product increases the risk
of fire. Always inspect the product
for damages before use.
■ Remove the battery pack from the
product when not in use.
■ Do not disassemble or modify the
product. Electric shock hazard may
occur even when a battery is not
installed. Any part that is damaged
should be properly repaired or replaced
by an authorised service centre.
■ To reduce the risk of injury, close
supervision is necessary when the
product is used near children.
■ Store the product indoors and away
from children.
■ Use caution when plugging or
unplugging other devices into the
product. Do not force plugs into the
product.
■ If the product is used in a manner
not specified by the manufacturer,
the protection provided by this
equipment may be impaired.
■ Do not overload the product. The
product must be used for powering
devices less than the product rating.
■ Never block the air vents. Blocked
vents may cause overheating. The
product automatically turns off when
overheated.
■ Keep the product cool. Do not place
the product near heat vents or in
direct sunlight.
■ Do not use the product around
flammable fumes and gases, such
as in the bilge of a boat or near
propane tanks.
■ Do not put foreign objects into the
product.
■ Operate the product using only the
AC power type listed in the product
specifications.
■ The product should never be hard-
wired into a circuit.
■ Do not leave the product unattended
during operation