Ryobi RTS10, Руководство оператора

Страница: 18 / 116

18 - English
ASSEMBLY
IN “UP” POSITION FOR THROUGH CUTTING
IN “DOWN” POSITION FOR NON-THROUGH CUTTING
RELEASE LEVER
(LOCKED)
Fig. 11
RELEASE LEVER
(UNLOCKED)
TO CHANGE RIVING KNIFE POSITIONS
See Figure 11.
This saw is shipped with a riving knife that should be placed
in the “down” position for non-through cutting and must be
placed in the “up” position for all other cutting operations.

Unplug the saw.
To place in the “up” position for all through cutting:

Remove the throat plate.

Raise the saw blade by turning the height/bevel adjusting
handwheel clockwise.

Unlock the release lever by pulling it up.

Grasp the riving knife and pull it towards the right side of
the saw to release the riving knife from the spring-loaded
riving clamp.

Pull the riving knife up until the internal pins are engaged
and the riving knife is above the saw blade.

Lock the release lever by pushing the lever down.

Reinstall the throat plate.
To place in riving knife “down” position for all non-
through cutting:

Remove the throat plate.

Raise the saw blade by turning the height/bevel adjusting
handwheel clockwise.

Unlock the release lever by pulling it up.

Grasp the riving knife and pull it towards the right side of
the saw to release the riving knife from the spring-loaded
riving clamp.

Push the riving knife down until it is below the saw blade.

Pull the riving knife up until the internal pins are engaged
and the riving knife is above the saw blade.

Lock the release lever by pushing the lever down.

Reinstall the throat plate.