background image

1

Safety, performance, and dependability have 

been given top priority in the design of your 

petrol high pressure cleaner.

INTENDED USE

The petrol high pressure cleaner is only 

intended for use outdoors. For safety reasons, 

the product must be adequately controlled by 

using two-handed operation.
The product is designed for home or domestic 

use. It is intended to clean machines, vehicles, 

buildings,  floors,  tools,  facades,  terraces, 

floors, and concrete walkways by removal of 

stubborn dirt using clean water with or without 

cleaning detergent.
It should be used in dry and well-illuminated 

conditions.
Do not use the product for any other purpose.

 

 WARNING

The product is designed for use with a neutral 

cleaning agent supplied or recommended by 

the manufacturer. The use of other cleaning 

agents or chemicals may adversely affect 

the safety of the product.

GENERAL SAFETY WARNINGS

 

 CAUTION

The product must not be used on the 

drinking  water  supply  without  a  backflow 

preventer being installed that corresponds to 

EN 12729 Type BA. Water flowing through 

a  backflow  preventer  is  considered  non-

drinkable.  Always  observe  the  regulations 

of your local water utility company when 

connecting the product to a water supply 

line.

 

 WARNING

Read all safety warnings and all 

instructions.

 Failure to follow the warnings 

and instructions may result in electric shock, 

fire, and/or serious injury.

 

The product is not intended for use by 

children or persons with reduced physical, 

sensory,  or  mental  capabilities,  or  lack 

of  experience  and  knowledge.  Children 

should be adequately supervised to ensure 

they do not play with the product.

 

Wear a complete personal protective 

equipment when operating the product, 

such as boots, safety gloves, safety 

helmets with visor, and hearing protection. 

Use high-impact visors only with liquid 

splash protection.

 

 WARNING

Do not use the product when people are 

within range, unless they wear protective 

clothing.

 

To reduce the risk of injury, keep children 

and visitors away. All visitors should wear 

safety  glasses  and  be  kept  at  a  safe 

distance from the work area.

 

Inspect the safety devices, such as safety 

valves, flow switches, and pressure 

switches  to  check  if  they  are  in  good 

working  condition.  Make  sure  all  safety 

devices are operating properly before each 

use. The trigger lock out locks the trigger 

and prevents unintentional opening of the 

high-pressure jet.

 

Do not use the product if the important 

parts are damaged, such as safety devices, 

high-pressure hoses, or trigger gun.

 

Exercise caution when opening the trigger. 

Hold the trigger handle firmly with two 

hands  to  avoid  injury  when  the  trigger 

handle kicks back.

 

 WARNING

During use of high pressure cleaners, 

aerosols may be formed. Inhalation of 

aerosols can be hazardous to health.

 

 WARNING

Depending on the application, shielded 

nozzles can be used for high-pressure 

cleaning, which will reduce the emission 

of hydrous aerosols. However, not all 

applications allow the use of such a device. 

If shielded nozzles are not applicable for the 

protection against aerosols, a respiratory 

mask  of  class  FFP  2  or  equivalent  may 

be needed, depending on the cleaning 

environment.

Содержание RPW3200













































Отзывы: