Ryobi RPW190BL-G, Руководство по эксплуатации

Страница: 10 / 32

8
USING THE HIGH PRESSURE HOSE
WARNING
Injection hazard. Fully unwrap and
straighten high pressure hose prior to and
during each use and do not allow it to
become kinked. The high pressure hose
features an outer covering that provides
strength to the hose. If the outer covering
becomes damaged, stop using the hose
and replace it immediately. A kinked or
damaged hose can develop a high pressure
leak and result in a possible injection or
other serious personal injury.
To prevent damage to the outer covering,
follow these precautions:
■ Inspect the hose before every use.
■ Fully unwrap and straighten the hose
before use.
■ Do not allow the high-pressure hose to be
kinked.
■ Keep the hose away from hot surfaces and
sharp edges.
■ Do not pull the product by using the high-
pressure hose.
■ Do not allow the hose to be crushed or
wrapped around objects.
WASHING WITH DETERGENT
Use only detergents designed for high
pressure washers. Household detergents,
acids, alkalines, bleaches, solvents,
flammable material, or industrial grade
solutions can damage the pump. Many
detergents may require mixing prior to use.
Prepare the cleaning solution as instructed on
the solution bottle.
NOTE: Spray the detergent on a dry surface
using long, even, overlapping strokes. To
prevent streaking, do not allow detergent to
dry on the surface.
Before turning off the motor
■ Fill the soap tank with clean water.
■ Spray the clear water through the spray
wand until the tank is empty.
■ If any detergent remains in the spray,
repeat with a second tank of clean water.
■ Turn off the motor.
NOTE: Turning off the motor will not relieve
pressure in the system. Pull trigger to release
water pressure.
RINSING WITH THE HIGH PRESSURE
WASHER
■ Turn off the pressure washer and turn off
the water supply. Pull trigger to release
water pressure.
■ Engage the lock out on the trigger handle
by pushing up on the lock out until it clicks
into the slot.
■ Remove the soap nozzle and place it in the
nozzle storage area on the machine.
■ Select the right nozzle for the job. See the
chart shown earlier in the manual to select
the appropriate nozzle.
■ Start at the top of the area to be rinsed and
work down, overlapping the strokes.
POWER CORD STORAGE
When it is not in use, the power cord may be
coiled and suspended from the holder on the
handle.
To secure the power cord in place, use the
attached bungee cord.
MOVING THE PRESSURE WASHER
NOTE: Never lift or carry the product using
the handle and never place it in any position
other than upright on its wheels.
SYMBOLS ON THE PRODUCT
Warning
To reduce the risk of injury,
user must read and understand
operator’s manual before using
this product.
Wear full eye and ear protection.
Remove plug from the mains
immediately if cable is damaged
or cut.
Electrical shock hazard
The product is not suitable
for connection to the drinking
water mains without backflow
preventer.