background image

3

wear non-slip, heavy-duty protective gloves. Do not 

place your hand or fingers between blades or in any 

position where they could get pinched or cut.

 

Always stop the product, remove the battery pack, 

make sure all moving parts have come to stop, and 

allow the pole hedge trimmer to cool down before:

 

adjusting the working position of the cutting device

 

cleaning or clearing a blockage

 

leaving the product unattended

 

checking, maintaining, or working on the product.

 

Do not force the product through heavy shrubbery. This 

can cause the blades to bind and slow down. If the 

blades slow down, reduce the pace.

 

Do not attempt to cut stems or twigs that are larger 

than 28 mm thick, or those obviously too large to feed 

into the cutting blade. Use a non-powered hand saw or 

pruning saw to trim large stems.

 

Do not operate the product with damaged or excessively 

worn blades.

 

If the cutting mechanism strikes any foreign object or 

the pole hedge trimmer starts making unusual noise 

or vibration, stop the product, remove the battery, and 

allow the product to stop before you do the following:

 

inspect for damage

 

check for, and tighten, any loose parts

 

have any damage parts replaced or repaired with 

parts having equivalent specifications.

 

 WARNING

If the product is dropped, suffers heavy impact, or begins 

to vibrate abnormally, immediately stop the product and 

inspect for damage or identify the cause of the vibration. 

Any damage should be properly repaired or replaced by 

an authorised service centre.

 

 WARNING

Check that all the shaft couplings on the extension shaft 

and tool are securely fastened before each use and at 

frequent intervals.

ADDITIONAL BATTERY SAFETY WARNINGS

 

 WARNING

To reduce the risk of fire, personal injury, and product 

damage due to a short circuit, never immerse your 

tool, battery pack or charger in fluid or allow a fluid to 

flow  inside  them.  Corrosive  or  conductive  fluids,  such 

as seawater, certain industrial chemicals, and bleach 

or bleach-containing products, etc., can cause a short 

circuit.

TRANSPORTATION AND STORAGE

 

Stop the product,

 

remove the battery, and allow both to 

cool before storing or transporting 

 

Clean all foreign

 

material from the product. Store it in a 

cool, dry, and well-ventilated place that is inaccessible 

to children. For extra safety, store the battery separately 

from the pole hedge trimmer. Keep away from corrosive 

agents such as garden chemicals and de-icing salts. Do 

not store outdoors.

 

Cover the blade with the blade protector before storing 

the product or during transportation.

 

For transportation in a vehicle, secure the product 

against movement or falling to prevent injury to persons 

or damage to the product.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national 

provisions and regulations.

Follow all special requirements on packaging and labelling 

when transporting batteries by a third party. Ensure that 

no batteries can come in contact with other batteries 

or conductive materials while in transport by protecting 

exposed connectors with insulating, non-conductive caps 

or tape. Do not transport batteries that are cracked or 

leaking. Check with the forwarding company for further 

advice.

MAINTENANCE

 

 WARNING

Use only original manufacturer’s replacement parts, 

accessories, and attachments. Failure to do so can 

cause possible injury, contribute to poor performance, 

and may void your warranty.

 

 WARNING

Servicing requires extreme care and knowledge 

and  should  be  performed  only  by  a  qualified  service 

technician. For service, bring the product to an 

authorised service centre. When servicing, use only 

original replacement parts.

 

 WARNING

The blades are sharp. To prevent personal injury, 

exercise extreme caution when cleaning, lubricating and 

fitting, or removing the blade protector.

 

Remove the battery and make sure all moving parts 

have come to a complete stop before conducting any 

maintenance or cleaning work.

 

You may only make adjustments or repairs described 

in this manual. For other repairs, contact the authorised 

service centre.

 

After each use, clean the product with a soft, dry cloth.

 

After each use, clean the debris from the blades with a 

stiff brush, and then carefully apply a rust preventative 

lubricant before refitting the blade protector. Use the 

recommended rust preventative and lubricant spray 

to apply an even distribution and reduce the risk of 

personal injury from contact with the blades. For 

information about suitable spray product, check with 

your local authorised service centre.

 

Lubricate the blades lightly before use if necessary 

using the above method.

 

Check all nuts, bolts, and screws at frequent intervals 

for proper tightness to ensure that the product is in safe 

Содержание RPT3600

























Отзывы: