Ryobi RLT3600E, Оригинальное руководство пользователя

Страница: 5 / 24

Operation
3
of debris.
■ Before use and after any impact, check that there are
no damaged parts. Examine the cutting means for signs
of cracking or other damage. A defective switch or any
part that is damaged should be properly repaired or
replaced by an authorised service facility.
■ Make sure the head attachment is properly installed
and securely fastened.
■ Make sure all guards, deflectors and handles are
properly and securely attached.
■ Do not modify the product in any way, this may increase
the risk of injury to yourself or others.
■ Use only the manufacturer’s replacement cutting line.
Do not use any other cutting attachment.
MAINTENANCE
WARNING
Use only original manufacturer’s replacement parts,
accessories and attachments. Failure to do so can
cause possible injury, poor performance and may void
your warranty.
WARNING
Servicing requires extreme care and knowledge
and should be performed only by a quali
fi ed service
technician. For service, we suggest you bring the
product to your nearest authorised service centre for
repair. When servicing, use only identical replacement
parts.
■ You may make adjustments and repairs described
here. For other repairs, contact the authorised service
agent.
■ Always remove the battery pack from the product
before conducting any maintenance, cleaning work or
when not in use.
■ Before any maintenance or adjustment, disable the
product by removing the power source.
■ After extending new cutter line or cleaning, always
return the product to its normal operating position
before starting.
■ After each use, clean the product with a soft dry cloth.
■ Check all nuts, bolts and screws at frequent intervals
for proper tightness to ensure the product is in safe
working condition. Any part that is damaged should be
properly repaired or replaced by an authorised service
centre.
TRANSPORTATION AND STORAGE
■ Stop the product and allow it to cool before storing
or transporting. Do not store or transport the product
with batteries fitted. Remove and separately store the
batteries.
■ Clean all foreign material from the product. Store the
product in a cool dry and well-ventilated place that is
inaccessible to children. Keep away from corrosive
agents, such as garden chemicals and de-icing salts.
Do not store outdoors.
■ For transportation, secure the product against
movement or falling to prevent injury to persons or
damage to the product.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that
no batteries can come in contact with other batteries
or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps
or tape. Do not transport batteries that are cracked or
leaking. Check with the forwarding company for further
advice.
BATTERY PROTECTION
Ryobi 36 V lithium-ion batteries are designed with features
that protect the lithium-ion cells and maximise battery life.
If the product stops during use, the following may be the
causes:
■ The maximum current draw of the battery has been
exceeded, causing it to automatically stop powering the
product. Release the trigger to reset the product and
pull the trigger to resume operation.
■ Excessive temperatures will cause the battery to stop
powering the product. Feel the battery pack; if it is too
warm, allow it to cool down.
RESIDUAL RISKS
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and the
operator should pay special attention to avoid the following:
■ Injury caused by vibration. Hold the tool by designated
handles and restrict working time and exposure.
■ Exposure to noise can cause hearing injury. Wear ear
protection and limit exposure.
■ Eye injury due to flying debris. Wear eye protection at
all times.
RISK REDUCTION
It has been reported that vibrations from hand-held tools
may contribute to a condition called Raynaud’s Syndrome
in certain individuals. Symptoms may include tingling,
numbness and blanching of the
fi ngers, usually apparent
upon exposure to cold. Hereditary factors, exposure to
cold and dampness, diet, smoking and work practices