Operation
2
power tools.
Such preventive safety measures reduce
the risk of starting the power tool accidentally.
■
Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
■
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly
maintained power tools.
■
Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
■
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed.
Use of the power tool for operations
different from those intended could result in a
hazardous situation.
BATTERY TOOL USE AND CARE
■
Recharge only with the charger specified by the
manufacturer.
A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
■
Use power tools only with specifically designated
battery packs.
Use of any other battery packs may
create a risk of injury and fire.
■
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
■
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
SERVICE
■
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
LINE TRIMMER SAFETY WARNINGS
■
Never allow children or people unfamiliar with the
instructions to use the product.
■
Avoid using the product in bad weather, especially
there is a risk of lightning.
■
Use the product in daylight or good artificial light.
■
Keep bystanders, children and pets 15 m away from the
product while in use. Stop the product if anyone enters
the area.
■
Avoid using on wet grass.
■
Keep proper footing and balance at all times.
■
Do not walk backwards when using the product.
■
Walk, never run.
■
Keep the cutting head attachment below waist level.
■
Never operate the product with damaged guards or
without guards in place, Ensure the correct guards are
fitted, particularly after changing cutting attachments.
■
Never fit a metal replacement line.
■
Keep hands and feet away from the cutting means at
all times and especially when switching on the motor.
■
Beware, the cutting elements continue to rotate after
the motor is switched off.
■
Beware of objects thrown by the cutting means. Clear
debris like small stones, gravel and other foreign
objects from the work area before starting operation.
Wires or string may become entangled with the cutting
means.
■
Switch off and remove the battery pack before:
●
servicing
●
leaving the product unattended
●
cleaning the product
●
changing accessories
●
checking for any damage after hitting an object
●
checking for any damage if the product starts to
vibrate abnormally
●
performing maintenance
■
Wear full eye and hearing protection while operating the
product. If working in an area where there is a risk of
falling objects, head protection must be worn.
■
Hearing protection may restrict the operator’s ability
to hear warning sounds, pay particular attention to
potential hazards around and inside the working area.
■
Wear heavy long trousers, non-slip protective footwear,
and gloves. Do not wear loose fitting clothing, short
trousers, jewellery of any kind, or use with bare feet.
■
Secure long hair so it is above shoulder level to prevent
entanglement in moving parts.
■
The small blade fitted to the lawn trimmer guard is
designed to trim the new extended line to the correct
length for safe and optimum performance. The blade is
very sharp; do not touch it, particularly when cleaning
the tool.
■
Always ensure that ventilation openings are kept clear
Содержание RLT3600E
