8
ENGLISH (Original Instructions)
PROBLEM
POSSIBLE CAUSE
SOLUTION
Line will not advance
when you restart the
machine.
Cutting head is hard
to turn.
Grass wraps around
the attachment shaft
and the trimmer head
assembly.
Line trimmer stops
and will not start
again.
1. Line is welded to itself.
2. Not enough line on spool.
3. Line is too short.
4. Line is tangled in the spool.
Grass wrapped or built up
around head.
Cutting tall grass at ground level.
1. Unit failed.
2. Plug is damaged.
1. Lubricate with a silicone spray.
2. Replace the spool (Refer to “Replacing the spool”
earlier in this manual).
3. Pull the line while alternately pressing down on and
releasing bump button.
4. Remove the line from spool and rewind (Refer to
“Replacing the Cutting Line” earlier in this manual).
Clean affected parts of the machine.
Cut tall grass from top down.
1. Contact dealer to check damage.
2. Check the plug.
TROUBLESHOOTING
DISPOSAL
This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm
to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable
reuse of material resources. To return your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for environmental safe recycling.