background image

21

English

personal injury, keep all body parts away from 
the muffler.

1.  Ensure that the switch is in the STOP “0” position.
2. 

$OORZWKHPXIÀHUWRFRRO

3. 

5HPRYHWKHGHÀHFWRUUHWDLQLQJQXW

4. 

5HPRYH WKH GHÀHFWRU WR DFFHVV WKH VSDUN DUUHVWRU

screen and gasket.

5.  If dirty, clean the spark arrestor screen with a small 

wire brush. Replace the screen and gasket if they 
are cracked or otherwise deteriorated. Reinstall the 
retaining nut.

To obtain a replacement spark arrestor, contact your 
Ryobi dealer or service centre.

INSPECTING AND CLEANING THE CHAIN BRAKE
See Figure 57.

„

  Always keep the chain brake mechanism clean by 

lightly brushing the linkage free from dirt.

„

  Always test the chain brake performance after 

cleaning. Refer to 

Operating Chain Brake

 for 

additional information.

WARNING

Even with daily cleaning of the mechanism, the 
dependability of a chain brake to perform under 

field conditions cannot be certified. 

STORING THE PRODUCT

„

  Clean all foreign material from the product. Store it in 

a well-ventilated place that is inaccessible to children. 
Keep away from corrosive agents such as garden 
chemicals and de-icing salts.

„

  Observe local regulations for the safe storage and 

handling of petrol.

When storing 1 month or longer:

1.  Drain all fuel from tank into a container approved for 

petrol.

2.  Run the engine until it stops. This will remove all 

fuel-lubricant mix that could become stale and leave 
varnish and gum in the fuel system.

3.  Squeeze primer bulb several times to purge fuel from 

carburettor.

4.  Drain all bar and chain lubricant from tank into a 

container approved for lubricant.

Always place the scabbard over the guide bar and chain 
before transporting or storing the unit.

MAINTENANCE SCHEDULE
Check:

Fuel mixture level . . . . . . . . . . . . . . . . . .Before  each  use
Bar lubrication. . . . . . . . . . . . . . . . . . . . .Before  each  use

Chain tension . . . . . . . . . . . . . . . . . . . . .Before each use
Chain sharpness. . . . . . . . . . . . . . . . . . .Before  each  use
For damaged parts . . . . . . . . . . . . . . . . .Before  each  use
For loose fasteners. . . . . . . . . . . . . . . . .Before  each  use
For loose parts . . . . . . . . . . . . . . . . . . . .Before each use
Chain brake function. . . . . . . . . . . . . . . .Before  each  use
For fuel leaks . . . . . . . . . . . . . . . . . . . . .Before  each  use

Inspect and Clean:

Bar  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Before  each  use
Complete saw. . . . . . . . . . . . . . . . . . . . . . After  each  use
Air  filter . . . . . . . . . . . . . . . . . . . . . . . . . . . Every  5  hours*
Chain brake  . . . . . . . . . . . . . . . . . . . . . . . Every  5  hours*

Replace spark plug

. . . . . . . . . . . . . . . . . . . . . . . . Yearly

Replace fuel filter

 . . . . . . . . . . . . . . . . . . . . . . . . . Yearly

* Hours of Operation

I

Содержание RCS4240NB

























Отзывы: