Ryobi RBV-3350, Руководство по эксплуатации для владельца, Страница: 12 / 16

11
MAINTENANCE
WARNING. Before inspecting, cleaning,
or servicing the machine, shut off motor,
wait for all moving parts to stop, and
disconnect extension cord. Failure to
follow these instructions can result in
serious personal injury or property
damage.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts.
Most plastics are susceptible to damage from
various types of commercial solvents and may be
damaged by their use. Use clean cloths to remove
dirt, dust, oil, grease, etc.
WARNING. Do not at any time let brake
fluids, gasoline, petroleum based
products, penetrating oils, etc., come in
contact with plastic parts. Chemicals can
damage, weaken or destroy plastic
which may result in serious personal
injury.
STORAGE (1 MONTH OR LONGER)
Clean all foreign material from the blower.
Store indoors in a place that is inaccessible to
children. Keep away from corrosive agents such as
garden chemicals and de-icing salts.
TROUBLESHOOTING
PROBLEM CAUSE REMEDY
Motor won’t start Lower tube hasn’t been telescoped
out to its full length
No power (power failure)
Connection lead wire defect
Motor or switch defect
Pull the lower tube out to its full
length.
Check circuit breaker.
Check fuse
Check circuit breaker.
Replace lead or have lead checked
(electrician); never use defective lead.
Contact the authorized service center.
Material is not sucked in properly (re-
duced vacuuming power)
Machine is clogged or blocked
Vacuum bag too full
Speed setting too low Clean tool
Empty bag
Adjust to higher speed
IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM, CONTACT YOUR AUTHORIZED SERVICING DEALER.