Ryobi RBV-3350, Руководство по эксплуатации для владельца, Страница: 10 / 16

OPERATION
WARNING. Do not allow familiarity with
products to make you careless.
Remember that a careless fraction of a
second is sufficient to inflict severe
injury.
WARNING. Always wear eye protection
with side shields marked to comply with
ANSI Z87.1. Failure to do so could result
in objects being thrown into your eyes,
resulting in possible serious injury.
WARNING. Never remove discharge
outlet elbow. Removal of elbow could
result in contact with moving fan blades
and cause serious personal injuries.
CONNECTING TO A POWER SUPPLY
This product is designed with a power cable
retainer that prevents the extension cord from
being pulled loose while using.
Form a loop with the end of the extension cord.
Insert loop portion of extension cord through the
opening in the bottom of the rear handle and place
over power cable retainer, Fig.8.
Slowly pull loop against power cable retainer until
the slack is removed.
Plug product into extension cord.
NOTE: Failure to remove all excess cord slack
from extension cord retainer could result in plug
loosening from the receptacle.
NOTE: Use only approved outdoor extension
cords.
NOTICE: Always use cord retainer to properly
attach extension cord to string trimmer. Failure to
use cord retainer may result in damage to string
trimmer and/or extension cord.
APPLICATIONS
You may use this product for the purposes listed
below:
Clearing leaves and other debris from your lawn.
Keeping decks and driveways free from leaves and
pine needles.
Vacuuming leaves from your lawn.
OPERATION
SWITCHING BETWEEN BLOWER MODE AND
VACUUM MODE (FIG.9)
WARNING. Always ensure that your unit
is switched off and has fully stopped
before changing the mode of operation.
Do not force the quick change lever. It should move
smoothly without resistance. If you encounter
problems, disconnect from power supply and clean
the lever mechanism.
For blower mode:
Switch the quick change lever so it
points to the blow symbol.
For vacuum mode:
Switch the quick change lever so it
points to the vacuum symbol.
Fig. 8
Fig. 9
9