Ryobi RBC42FSB Скачать руководство пользователя страница 14

19

English(Original instructions)

TROUBLESHOOTING

Problem

Possible cause

Solution

Engine will not start.

No spark

The spark plug may be damaged, remove it and check for 
dirt and cracks. Replace with a new spark plug.

No fuel.

Push primer bulb until bulb is full of fuel. If bulb does not 

fi

 ll, primary fuel delivery system is blocked. Contact a 

service dealer. If primer bulb 

fi

  lls, engine may be 

fl

 ooded 

(see next item).

Flooded engine.

Remove spark plug, turn trimmer so spark plug hole is 
aimed at the ground. Make sure lever is in the open choke 
position and pull starter cord 10 to 14 times. This will clear 
excess fuel from engine. Clean and reinstall spark plug. 
With the throttle trigger fully depressed, pull starter cord 
three times with lever at open choke position. If engine 
does not start, move choke lever to close choke position 
and follow normal starting instructions in “STARTING 
AND STOPPING” section. If engine still fails to start, 
repeat procedure with a new spark plug.

Starter rope pulls harder now than when 
new.

Contact a service dealer.

Engine starts but will not 
accelerate.

Carburetor requires adjustment.

Contact a service dealer.

Engine does not reach full speed 
and emits excessive smoke.

Check oil fuel mixture.

Use fresh fuel and the correct synthetic 2-stroke oil mix.

Air 

fi

  lter dirty.

Clean air 

fi

  lter. Refer to “Replacing and Cleaning Air 

Filter” earlier in this manual.

Carburetor requires adjustment.

Contact a servicing dealer.

Engine starts, runs, and 
accelerates but will not idle.

Carburettor requires adjustment.

Contact a servicing dealer.

Blade continues to rotate at idle 
speed.

Carburetor requires adjustment.

Contact a servicing dealer.

Grass wraps round shaft housing 
and string head.

Cutting tall grass at ground level.

Cut tall grass from the top down.

Operating trimmer at part throttle.

Operate trimmer at full throttle.

Oil drips from silencer.

Operating trimmer at part throttle.

Operate trimmer at full throttle.

Check oil/fuel mixture.

Use fresh fuel and the correct synthetic 2-stroke oil mix.

Air 

fi

 lter is dirty.

Clean per instruction in Maintenance Section.

Carburetor requires adjustment.

Contact a servicing dealer.

Содержание RBC42FSB















Отзывы: