![background image](http://html1.mh-extra.com/html/ryobi/r18frf10/r18frf10_manual_1504735005.webp)
5
Original Instructions
Function
Description
Power button
Turns the product on or
off.
Cooling mode
Toggles between fast
cooling or energy saving.
Temperature
control
Adjusts the cooling or
heating temperature.
Temperature unit
setting
Adjusts the temperature
unit to Celsius or
Fahrenheit.
Battery
protection mode
Protects the installed
battery pack from
overvoltage. Set H (high)
protection mode when
connecting the product
to car power. Set M
(medium) or L (low)
protection mode when
connecting to a portable
or back-up power source.
Reset mode
Resets the product.
Activate the reset mode
to revert the product to its
factory settings.
ADDITIONAL BATTERY SAFETY
WARNINGS
To reduce the risk of fire, personal injury,
and product damage due to a short circuit,
never immerse the product, battery pack, or
charger in fluid or allow fluid to flow inside
them. Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and
bleach or bleach-containing products, etc., can
cause a short circuit.
TRANSPORTATION AND STORAGE
■
Drain all water, remove food and drinks
from the product, and wipe the interior with
a clean, dry cloth. Remove the battery pack
and make sure that all compartments are
securely closed. Store the product with the
handle folded down.
■
Do not store or transport the product with
the battery pack fitted. Remove the battery
pack, and secure it separately. Store the
product in a cool, dry, and well-ventilated
place that is inaccessible to children. Keep
the product away from corrosive agents,
such as garden chemicals and de-icing
salts. Do not store the product outdoors.
■
When transporting the product in a vehicle,
secure it against movement or falling to
prevent injury to persons or damage to the
product.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local
and national provisions and regulations.
Follow all special requirements on packaging
and labelling when transporting batteries
by a third party. Ensure that no batteries
can come in contact with other batteries or
conductive materials while in transport by
protecting exposed connectors with insulating,
nonconductive caps or tape. Do not transport
batteries that are cracked or leaking. Check
with the forwarding company for further advice.
MAINTENANCE
■
Use only original manufacturer’s
replacement parts, accessories, and
attachments. Failure to do so can cause
possible injury, can contribute to poor
performance, and may void your warranty.
■
Servicing requires extreme care and
knowledge and should be performed only
by a qualified service technician. Have the
product serviced by an authorised service
centre only.
■
You may make adjustments and repairs
described in this manual. For other repairs,
contact an authorised service centre.
■
Avoid using solvents when cleaning plastic
parts. Most plastics are susceptible to
damage from various types of commercial
solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, or
grease. Do not at any time let brake fluids,
gasoline, petroleum-based products, or
penetrating oils come in contact with plastic
parts. Chemicals can damage, weaken, or
destroy plastic, resulting in serious personal
injury.
■
Bring the product to an authorised service
centre to replace damaged or unreadable
labels.
■
If the supply cord is damaged, it must be
replaced by a special cord or assembly
available from the manufacturer or its
service agent.
■
The product does not contain gasses, in
either its refrigerant circuit or insulation
materials, which could damage the ozone
layer. Do not discard the product together
with urban waste.
Содержание R18FRF10
Страница 1: ...R18FRF142 R18FRF10...
Страница 10: ...10 Operating the product Moving the product Cleaning and storing the product p 11 p 13 p 14...
Страница 18: ......
Страница 19: ......