manualshive.com logo in svg
background image

3

Original Instructions

 

before clearing a blockage

 

before checking, cleaning, or working on 

the product

 

before changing accessories

 

before leaving the product unattended

 

before checking for damage after striking 

a foreign object

 

whenever performing maintenance

 

Immediately turn off the product and remove 

the battery pack in the event of an accident 

or breakdown. Never operate the product 

again until it has been fully checked by an 

authorised service centre.

ELECTRICAL SAFETY

 

Make sure that the voltage is correct for 

your product. A nameplate on the product 

indicates the product’s voltage. Never 

connect the product to an AC voltage that 

differs from this voltage.

 

Electrical power should be supplied via a 

residual current device (RCD) with a tripping 

current of not more than 30 mA.

 

Before use, check the power cord for signs 

of damage or aging. If the cord becomes 

damaged during use, disconnect the 

cord from the supply immediately. Do not 

touch the cord before disconnecting the 

supply. Do not use the product if the cord is 

damaged or worn.

 

Power plugs must match the outlet. Never 

modify the plug in any way. Do not use 

any adapter plugs with earthed (grounded) 

power tools. Unmodified plugs and matching 

outlets will reduce risk of electric shock.

 

Avoid body contact with earthed or grounded 

surfaces, such as pipes, radiators, ranges 

and refrigerators. There is an increased risk 

of electric shock if your body is earthed or 

grounded.

 

Keep the power cord away from heat, oil 

and sharp edges.

 

Never pull by the power cord to disconnect 

the product from the power supply.

BATTERY TOOL USE AND CARE

 

Remove the battery pack from the product 

before charging.

 

Recharge only with the charger specified by 

the manufacturer. A charger that is suitable 

for one type of battery pack may create a 

risk of fire when used with another battery 

pack.

 

Do not mix battery packs of different types 

or levels of use.

 

Use only battery packs intended specifically 

for the product. Use of any other battery 

packs may result in a risk of fire, electric 

shock, or injury to persons.

 

Do not use a battery pack or tool that 

is damaged or modified. Damaged or 

modified batteries may exhibit unpredictable 

behaviour resulting in fire, explosion or risk 

of injury.

 

Do not expose a battery pack or tool to fire 

or excessive temperatures. Exposure to fire 

or temperature above 130 °C may cause an 

explosion.

 

When the battery pack is not in use, keep 

it away from other metal objects, such as 

paper clips, coins, keys, nails, screws, or 

other small metal objects that can make a 

connection from one terminal to another. 

Shorting the battery pack terminals may 

cause burns or a fire.

 

Under abusive conditions, liquid may be 

ejected from the battery pack; avoid contact. 

If contact accidentally occurs, flush with 

water. If liquid contacts eyes, seek medical 

help. Liquid ejected from the battery pack 

may cause irritation or burns.

HYBRID COOLER SAFETY WARNINGS

 

Use the product with the provided supply 

cord only.

 

Insert the plug properly into the DC inlet. 

Failure to do so may deform the plug or 

cause a fire.

 

Use caution when positioning the product 

for use. Make sure that the supply cord is 

not trapped or damaged. Never direct air 

flow toward any electrical wiring or devices.

 

Make sure that the lid is securely closed, 

and the battery compartment is securely 

latched before turning on the product.

 

If the product is operated indoors, make 

sure that the room or area is well-ventilated.

 

Do not stand or sit on the lid.

 

Do not insert fingers, hands, body parts, or 

objects into the vent during use to reduce 

the risk of electric shock or other serious 

personal injury.

 

Do not use the product to disperse liquid 

medicines, chemicals, or other liquids. 

Содержание R18FRF10





















Отзывы: