Ryobi R18CHS20, Руководство пользователя

Страница: 17 / 20

PRODUCT SPECIFICATIONS
Cordless chainsaw
Model R18CHS20
Rated voltage 18 V d.c.
No-load speed 4.6 m/s
Guide bar length 203 mm
Usable cutting length 180 mm (7 in.)
Chain stop <2 s
Chain length 203 mm (8 in.)
Chain pitch 9.525 mm (3/8 in.)
Chain gauge 1.09 mm (0.043 in.)
Drive links quantity 33
Weight (without battery pack, guide
bar, chain, and oil)
1.9 kg
Vibration level (in accordance with IEC 62841-1 and
IEC 62841-4-1)
Front handle 3.0 m/s
2
Rear handle 2.8 m/s
2
Uncertainty of measurement 1.5 m/s
2
Noise emission level (in accordance with IEC 62841-1 and
IEC 62841-4-1)
A-weighted sound pressure level at
the operator’s position
82.2 dB(A)
Uncertainty of measurement 3.0 dB
A-weighted sound power level 90.2 dB(A)
Uncertainty of measurement 2.8 dB
BATTERY AND CHARGER
Model R18CHS20
Compatible
battery
packs
RB18L13, RB18L13Z, RB18L15, RB18L15A,
RB18L15B, RB1815C, RB18L20A, RB1820C,
RB18L25A, RB1825C, RB18L26, RB18L30A,
RB18L40A, RB1840C, RB1840X, RB18L50A,
RB1850C, RB1850X, RB18L60A, RB1860X,
RB18L90A
Compatible
chargers
BCL14183H, RC18627, RC18627U, RC18150,
RC18150U, RC18120, RC18115, RC18118C,
BCL1418IV
REPLACEMENT PARTS
Manufacturer TRILINK POWERFIT
Chain CL14333PB PWFTCA801
Bar N1430833-1041RY -
The chain must be fitted with the bar from the same
manufacturer according to above combinations.
MAINTENANCE
Chainsaw file 4.0 mm (5/32 in.)
WARNING! The declared vibration total values and the
declared noise emission values given in this instruction
manual have been measured in accordance with a
standardised test and may be used to compare one tool with
another. They may be used for a preliminary assessment
of exposure.
The declared vibration and noise emission values represent
the main applications of the tool. However, if the tool is used
for different applications, used with different accessories,
or poorly maintained, the vibration and noise emission
may differ. These conditions may significantly increase the
exposure levels over the total working period.
An estimation of the level of exposure to vibration and noise
should take into account the times when the tool is turned off
or when it is running idle. These conditions may significantly
reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and noise, such as maintaining
the tool and the accessories, keeping the hands warm (in
case of vibration), and organising work patterns.