manualshive.com logo in svg
background image

OPERATOR’S MANUAL

MANUEL D’UTILISATION
MANUAL DEL OPERADOR

18 VOLT 1/2 in.  
HAMMER DRILL

MANUEL D’UTILISATION/PERCEUSE À 

PERCUSSION 18 V de 13 mm (1/2 po)
MANUAL DEL OPERADOR/TALADRO DE 

PERCUSIÓN de 18 V 13 mm (1/2 pulg.)

PCL220

 

WARNING:

 

To reduce the 

risk of injury, the user must read and 

understand the operator’s manual 

before using this product.

SAVE THIS MANUAL FOR 

FUTURE REFERENCE

 

ADVERTENCIA:

 

Para reducir 

el riesgo de lesiones, el usuario debe 
leer y comprender el manual del 
operador antes de usar este producto. 

  AVERTISSEMENT : 

Pour réduire les risques de blessures, 

l’utilisateur doit lire et veiller à bien 

comprendre le manuel d’utilisation avant 

d’employer ce produit.  

GUARDE ESTE MANUAL 

PARA FUTURAS CONSULTAS

CONSERVER CE MANUEL 

POUR FUTURE RÉFÉRENCE

TABLE OF CONTENTS

****************

  General Power Tool  

Safety Warnings .............................. 2-3

  Drill-Driver Safety Warnings ................4

 

Symbols ..............................................5



 

Features ..............................................6 

 Assembly ............................................6

 Operation ........................................ 6-8

 Maintenance .......................................9

 Troubleshooting ..................................9

 Illustrations ........................................10

  Parts Ordering  

and Service ......................... Back page

TABLE DES MATIÈRES

****************

  Avertissements de sécurité générales 

relatives aux outils électriques ........ 2-3

  Avertissements de sécurité relatifs 

perceuse-tournevis .............................4

 

Symboles ............................................5



 

Caractéristiques ..................................6

 Assemblage ........................................6

 Utilisation  ....................................... 6-8

 Entretien ..............................................9

 Dépannage ..........................................9

 Illustrations ........................................10

  Commande de pièces  

et dépannage .................... Page arrière

ÍNDICE DE CONTENIDO

****************

  Advertencias de seguridad para 

herramientas eléctrica .................... 2-3

  Advertencias de seguridad de  

taladro-destornillador .........................4



 

Símbolos .............................................5

 

Características ....................................6



 Armado ...............................................6

 Funcionamiento .............................. 6-8

 Mantenimiento ....................................9

  Corrección de problemas ...................9

 Illustraciones .....................................10



  Pedidos de piezas  

y servicio ........................ Pág. posterior

Содержание PCL220





























Отзывы: