manualshive.com logo in svg
background image

9

MAiNTENANCE

BULB

ASSEMBLY

Fig. 7

RETAINER

PIN

CAUTiON:

Do not use a higher rated fuse other than the specified 
amperage. This could cause damage to the product.

REPLACEMENT FUSE

See Figure 8.

If the 

spotlight

 blows its fuse, you will need to replace it. Look 

for replacement fuses where you purchased this product.

 

Remove the battery pack from the 

spotlight

 to access 

fuse housing.

  Remove  the  current  fuse  and  discard.  Use  a  pair  of  

fuse pullers if necessary. 

  Use 10 amp JAT blade type automotive fuse to replace 

the blown fuse.

NOTE: Only use 10 amp JAT blade type automotive fuses 
for replacement. If second fuse blows, return to authorized 
service center for repair. Always ask for replacement fuse 
number 01900001013.

bATTERiES

This product will accept 18 V lithium-ion batteries or 18 V 
nickel-cadmium  batteries.  Length  of  service  from  each 
charging will depend on the type of work you are doing.
The batteries for this product have been designed to provide 
maximum trouble-free life. However, like all batteries, they 
will eventually wear out. Do not disassemble battery pack 
and  attempt  to  replace  the  batteries.  Handling  of  these 
batteries, especially when wearing rings and jewelry, could 
result in a serious burn.
To obtain the longest possible battery life, we suggest the 
following:
For lithium-ion batteries:

  Remove the battery pack from the charger once it is fully 

charged and ready for use.

For battery pack storage longer than 30 days:

  Store the battery pack where the temperature is below 

80°F and away from moisture. 

  Store battery packs in a 30%-50% charged condition.

  Every  six  months  of  storage,  charge  the  pack  as 

normal.

For nickel-cadmium batteries:

  Remove the battery pack from the charger once it is fully 

charged and ready for use.

For battery pack storage longer than 30 days:

  Store the battery pack where the temperature is below 

80°F. 

  Store battery packs in a “discharged” condition.

Fig. 8

FUSE

bATTERy PACK REMOvAL ANd PREPARATiON 
FOR RECyCLiNg

To  preserve  natural  resources,  please 
recycle  or  dispose  of  batteries 
 properly.
This product uses nickel-cadmium and 
lithium-ion  batteries.  Local,  state  or 
federal  laws  may  prohibit  disposal  of 
batteries in ordinary trash.
Consult  your  local  waste  authority  for 
information regarding available recycling 
and/or disposal options. 

WARNiNg: 

Upon removal, cover the battery pack’s terminals with 
heavy-duty adhesive tape. Do not attempt to destroy or 
disassemble battery pack or remove any of its compo-
nents.  Lithium-ion  and  nickel-cadmium  batteries  must 
be recycled or disposed of properly. Also, never touch 
both terminals with metal objects and/or body parts as 
short circuit may result. Keep away from children. Failure 
to comply with these warnings could result in fire and/or 
serious injury.

Li - Ion

GOOD FUSE

BLOWN FUSE

Содержание P715











Отзывы: