Ryobi P113 Скачать руководство пользователя страница 9

9

MAINTENANCE

WARNING:

When  servicing,  use  only  identical  Ryobi  replacement 
parts.  Use  of  any  other  parts  may  create  a  hazard  or 
cause product damage.

WARNING:

Always wear safety goggles or safety glasses with side 
shields  during  power  tool  operation  or  when  blowing 
dust. If operation is dusty, also wear a dust mask.

WARNING:

To  avoid  serious  personal  injury,  always  remove  the 
battery pack from the tool when cleaning or performing 
any maintenance.

GENERAL MAINTENANCE

Avoid  using  solvents  when  cleaning  plastic  parts.  Most 
plastics are susceptible to damage from various types of 
commercial solvents and may be damaged by their use. Use 
clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact 
with  plastic  parts.  Chemicals  can  damage,  weaken  or 
destroy  plastic  which  may  result  in  serious  personal 
injury.

Only the parts shown on the parts list are intended to be 
repaired or replaced by the customer. All other parts should 
be replaced at an Authorized Service Center.

BATTERY PACK REMOVAL AND 
PREPARATION FOR RECYCLING

To  preserve  natural  resources,  please 
recycle or dispose of batteries properly.
This  product  uses  lithium-ion  or  nickel-
cadmium batteries. Local, state or federal 
laws may prohibit disposal of batteries in 
ordinary trash.
Consult  your  local  waste  authority  for 
information regarding available recycling 
and/or disposal options.

WARNING: 

Upon removal, cover the battery pack’s terminals with 
heavy-duty adhesive tape. Do not attempt to destroy or 
disassemble battery pack or remove any of its compo-
nents.  Lithium-ion  and  nickel-cadmium  batteries  must 
be recycled or disposed of properly. Also, never touch 
both terminals with metal objects and/or body parts as 
short circuit may result. Keep away from children. Failure 
to comply with these warnings could result in fire and/or 
serious injury.

BATTERIES

This charger will accept Ryobi One + 18 V lithium-ion batteries 
or  Ryobi  One+  18  V  nickel-cadmium  batteries.  Length  of 
service from each charging will depend on the type of work 
you are doing.
Batteries have been designed to provide maximum trouble-
free life. However, like all batteries, they will eventually wear 
out. Do not disassemble battery pack and attempt to replace 
the batteries. Handling of these batteries, especially when 
wearing rings and jewelry, could result in a serious burn.
To obtain the longest possible battery life, we suggest the 
following:
For lithium-ion batteries:

  Remove the battery pack from the charger once it is fully 

charged and ready for use.

For battery pack storage longer than 30 days:

  Store the battery pack where the temperature is below 

80°F and away from moisture. 

  Store battery packs in a 30%-50% charged condition.

  Every  six  months  of  storage,  charge  the  pack  as 

normal.

For nickel-cadmium batteries:

  Remove the battery pack from the charger once it is fully 

charged and ready for use.

For battery pack storage longer than 30 days:

  Store the battery pack where the temperature is below 

80°F. 

  Store battery packs in a “discharged” condition.

Li - Ion

Содержание P113











Отзывы: