9
Operation
3s
3
4
OPERATING THE PRODUCT
1. Remove the blade cover.
2. Install the battery pack. Make
sure that the latches on the
battery pack snap in place.
3. Press and hold the trigger for 3
seconds to turn on the product
and open the cutting blade. The
LED indicator turns on.
4. Press and release the trigger to
cut off a branch.
NOTE:
Cut at an angle for a
cleaner cut.
WARNING:
The temperature of
the product may rise, and over-
temperature protection may be
activated when cutting very dry
or hard materials. Wait for 10-15
minutes or until the product has
cooled down before resuming
1
2
