Ryobi ONE+ PSBRA02, Руководство оператора

Страница: 6 / 28

6 – English
WARNING:
Battery tools are always in operating condition. Therefore,
switch should always be locked when not in use or car-
rying at your side.
INSTALLING/REMOVING BATTERY PACK
See Figure 1, page 10.

Lock the switch trigger.
  Insert the battery pack into the product as shown.


Make sure the latches on each side of the battery pack
snap into place and the battery pack is secured in the
product before beginning operation.
 Depress the latches to remove the battery pack.
For complete charging instructions, see the operator’s manu-
als for your battery pack and charger.
SWITCH TRIGGER
See Figure 2, page 10.
To turn the drill
ON
, depress the switch trigger. To turn it
OFF,
release the switch trigger.
VARIABLE SPEED
This tool has a variable speed switch trigger that delivers
higher speed with increased trigger pressure. Speed is con-
trolled by the amount of switch trigger depression.
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes and other possible
serious injuries.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this tool. The use
of attachments or accessories not recommended can
result in serious personal injury.
APPLICATIONS
You may use this tool for the following purposes:
 Drilling in all types of wood products (lumber, plywood,
paneling, composition board, and hard board)

Drilling in ceramics, plastics, fiberglass, and laminates
 Drilling in metals
FEATURES
PRODUCT SPECIFICATIONS
Chuck ...........................................................3/8 in. Keyless
Switch ..........................................................Variable Speed No Load Speed .......................... 0-450/0-1700/min. (RPM)
Torque ................................................................... 350 in.lb.
ASSEMBLY
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories or attachments not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to pos-
sible serious personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
OPERATION