Ryobi OLT1830H, Оригинальное руководство пользователя, Страница: 3 / 25

1
WARNING
When using the product, the safety rules must be
followed. For your own safety and that of bystanders,
please read these instructions before operating the
product. Please keep the instruction safe for later use.
WARNING
This appliance is not intended to be used by children
or persons with reduced physical, mental or sensory
capabilities. Children should be adequately supervised
to ensure they do not play with the appliance.
WARNING
Some regions have regulations that restrict the use of
the product. Check with your local authority for advice.
TRAINING
Ŷ
Never allow children or people unfamiliar with these
instructions to use the product. Local regulations may
restrict the age of the operator.
Ŷ
Read the instructions carefully. Be familiar with all
controls and the proper use of the machine.
Ŷ
Keep in mind that the operator or user is responsible
for accidents or hazards occurring to other people or
their property.
PREPARATION
Ŷ
Before use, check the supply and extension cord
for signs of damage or aging. If the cord becomes
damaged during use, disconnect the cord from the
supply immediately.
Do not touch the cord before
disconnecting the supply. Do not use the appliance if
the cord is damaged or worn.
Ŷ
Wear full eye and hearing protection while operating the
product. If working in an area where there is a risk of
falling objects, head protection must be worn.
Ŷ
Hearing protection may restrict the operator’s ability
to hear warning sounds, pay particular attention to
potential hazards around and inside the working area.
Ŷ
Wear heavy long trousers, boots, and gloves. Do not
wear loose fitting clothing, short trousers, jewellery of
any kind, or use with bare feet.
Ŷ
Secure long hair so it is above shoulder level to prevent
entanglement in moving parts.
Ŷ
Before use and after any impact, check that there are
no damaged parts. A defective switch or any part that
is damaged or worn should be properly repaired or
replaced by an authorized service facility.
Ŷ
Make sure the cutting attachment is properly installed
and securely fastened.
Ŷ
Never operate the machine unless all guards, deflectors
and handles are properly and securely attached.
Ŷ
Consider the environment in which you are working.
Keep the working area free from wires, sticks, stones
and debris which if struck by the cutter can become
thrown objects.
GENERAL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
HOHFWULFVKRFN¿UHDQGRUVHULRXVLQMXU\
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
WORK AREA SAFETY
Ŷ
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Ŷ
Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust.
Power tools create sparks
which may ignite the dust or fumes.
Ŷ
Keep children and bystanders away while operating
a power tool.
Distractions can cause you to lose
control.
ELECTRICAL SAFETY
Ŷ
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
Ŷ
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric
shock if your body is earthed or grounded
Ŷ
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
Ŷ
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase
the risk of electric shock.
Ŷ
When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
Ŷ
If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply.
Use of an RCD reduces the risk of
electric shock.
PERSONAL SAFETY
Ŷ
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under the
influence of drugs, alcohol or medication.
A moment
of inattention while operating power tools may result in
serious personal injury.
Ŷ
Use personal protective equipment. Always wear
eye protection.
Protective equipment such as dust