Ryobi OLP18, Оригинальное руководство пользователя

Страница: 4 / 20

2
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
■ Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
■ Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
■ Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
■ Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
BATTERY TOOL CARE AND USE
■ Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
■ Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
■
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
■ Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
■ Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or
risk of injury.
■ Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above
130°C
may cause explosion.
■ Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specified
range may damage the battery and increase the risk
of fire.
SERVICE
■
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that safety of the power tool is maintained.
■ Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorised service providers.
CORDLESS POLE LOPPER SAFETY WARNINGS
■ Keep hands away from the blade. Contact with the
blade will result in serious personal injury.
■ Save these instructions. Refer to them frequently and
use them to instruct others who may use the product.
If you loan someone the product, loan them these
instructions also to prevent misuse of the product and
possible injury.
■ Do not use the product when there is a possibility of
thunderstorm or lightning. Store the product safely
indoors.
■ Beware of overhead power lines. Never operate the
product with the cutting means closer than 10 m from
overhead power lines.
■ Do not start using the product until you have a clear
work area, secure footing, and a planned retreat path
away from the falling branches or limbs.
■ Ensure that the product is in the correct working position
before starting the product.
■ Do not stand on ladders, platforms, a log, or in any
position that may cause you to lose your balance or
control of the product.
■ Use the harness if it is supplied with the product. The
harness assists in controlling the drop of the product
after the cut is completed. The harness also helps
support the weight of the product during use and while
moving between cutting positions.
■ Identify the harness quick-release mechanism and
practice using it before you start using the product.
Its correct use may prevent serious injury in the case
of an emergency. Never wear additional clothing over
the harness or otherwise restrict access to the quick-
release mechanism.
■ To protect yourself from falling branches, do not stand
directly under the branch or limb being cut. Do not hold
the product at an angle over 60° from ground level.
■ When cutting a limb under tension, be alert for spring
back so that you will not be struck when the tension in
the wood fibers is released.
■ Keep the product clean of clippings and other materials.
They may become lodged between the jaw and blade.
■ Operate the product only in temperatures between 0°C
and 40°C.
■ Store the product in a location where the ambient
temperature is between 0°C and 40°C.
ADDITIONAL SAFETY WARNINGS
■ Before use, check that there are no damaged parts.
Check the product regularly to make sure that it will
operate properly and perform the intended function. Do
not operate the product with damaged or excessively
worn blades. Any part that is damaged should be
properly repaired or replaced by an authorised service
centre.