![background image](http://html1.mh-extra.com/html/ryobi/olp18/olp18_original-instructions-manual_1505818016.webp)
PRODUCT SPECIFICATIONS
Cordless Pole Lopper
Model
OLP18
Compatible only with OPP1850 and OHT1860S
Cutting capacity
32 mm (soft wood)
28 mm (hard wood)
Below values are measured with OLP1832BP/RLP1832Li20
telescopic pole handles.
Rated voltage
18 V dc
Cutting cycle time
9 seconds
*Stops 4 seconds after each cut
Product length
1.9 - 2.7 m
Weight
3.5 kg
Weight with heaviest battery
pack
4.23 kg
Vibration level with telescopic pole handle (in accordance with
EN 62841-1)
Front handle
a
h
= 0.17 m/s
2
Rear handle
a
h
= 0.63 m/s
2
Uncertainty of
measurement
K
= 1.5 m/s
2
Noise emission level with telescopic pole handle (in accordance
with EN 62841-1)
A-weighted sound pressure
level at operator’s position
L
pA
=
78.6 dB (A)
Uncertainty of
measurement
K
= 3.0 dB
A-weighted sound power
level
L
wA
=
87.3 dB (A)
Uncertainty of
measurement
K
= 3.0 dB
BATTERY AND CHARGER
Model
OLP18
Compatible
battery packs
RB18L13, RB18L15, RB18L15A, RB18L15B,
RB18L20, RB18L20A, RB18L25, RB18L25A,
RB18L40, RB18L40A, RB18L50, RB18L50A,
RB18L60, RB18L60A, RB18L90, RB18L90A
Compatible
chargers
BCL14181H, BCL14183H, BCS618,
RC18627, RC18627U, RC18150, RC18150U,
RC18120, RC18115, RC18118C, BCL14181V
REPLACEMENT PARTS
Blade assembly
205378001
WARNING!
The declared vibration total values
and the declared noise emission values given in this
instruction manual have been measured in accordance
with a standardised test and may be used to compare
one tool with another. They may be used for a preliminary
assessment of exposure.
The declared vibration and noise emission values
represent the main applications of the tool. However, if the
tool is used for different applications, used with different
accessories, or poorly maintained, the vibration and noise
emission may differ. These conditions may significantly
increase the exposure levels over the total working period.
An estimation of the level of exposure to vibration and
noise should take into account the times when the tool
is turned off or when it is running idle. These conditions
may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator
from the effects of vibration and noise, such as maintaining
the tool and the accessories, keeping the hands warm (in
case of vibration), and organising work patterns.
Содержание OLP18
