Ryobi OJ1802, Руководство оператора

Страница: 8 / 18

8
WARNING:
Exercise caution when using the orbital jig saw. Care-
less actions, for even a fraction of a second, can result
in serious personal injury.
Before using the orbital jig saw, familiarize yourself with all
operating features and safety requirements. However, do
not let familiarity with the tool make you careless.
This new orbital jig saw is equipped with the following
features. See Figure 1.
TOOLLESS BLADE CLAMP
Your saw has a blade clamp design that does not require
the use of a tool (blade wrench) when installing or removing
the blade. Simply lift blade clamp lock / release lever,
located on front of saw, insert blade between blade clamp
and saw bar as far as possible, then release lever to lock
position.
BLADE SELECTION
To obtain the best performance from your saw it is important
to select a specific blade for the particular application and
type of material you wish to cut. By doing this you will get
a smoother, faster cut and prolong blade life. Replacement
blades for this saw are available from your nearest Ryobi
dealer. Ryobi recommends the use of T-shank style blades.
If U-shank style blades are used, they should be high quality
hardened steel.
FEATURES
LOCK-OFF BUTTON
Your saw is equipped with a "lock-off" button which reduces
the possibility of accidental starting. The lock-off button is
located on the handle above the switch trigger. You must
depress the lock-off button in order to pull the switch trigger.
The lock resets each time the trigger is released. Note: You
can depress the lock-off button from either the left or right
side.
SWITCH
To turn your saw ON , depress the lock-off button and pull
switch trigger. Release switch trigger to turn your saw OFF .
VARIABLE SPEED
This tool has a variable speed switch that delivers higher
speed with increased trigger pressure. Speed is controlled
by the amount of switch trigger depression.
BLADE STORAGE
When not in use, you can place the blades provided with
your orbital jig saw in the storage area located on the back
of the saw.
ERGONOMIC DESIGN
The design of the orbital jig saw provides for easy handling.
It is designed for comfort and ease of grasp when operating
in different positions and at different angles.