background image

5

IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER

SAVE THESE INSTRUCTIONS

WARNING:

Read and understand all instructions.

  Failure to

follow all instructions listed below, may result in elec-
tric shock, fire and/or serious personal injury.

Never use a battery that has been dropped or
received a sharp blow. 

A damaged battery is subject

to explosion. Properly dispose of a dropped battery
immediately. Failure to heed this warning can result in
serious personal injury.

Save these instructions. This manual contains im-
portant safety and operating instructions for charger.

Before using battery charger, read all instructions
and cautionary markings in this manual, on battery
charger, and product using battery charger. 

Follow-

ing this rule will reduce the risk of electric shock, fire, or
serious personal injury.

CAUTION: To reduce risk of injury,

 

charge only

nickel-cadmium type rechargeable batteries. Other
types of batteries may burst causing personal in-
jury and damage.

 Following this rule will reduce the risk

of electric shock, fire, or serious personal injury.

Do not expose charger to wet or damp conditions.

Following this rule will reduce the risk of electric shock,
fire, or serious personal injury.

Use of an attachment not recommended or sold by
the battery charger manufacturer may result in a
risk of fire, electric shock, or injury to persons.

Following this rule will reduce the risk of electric shock,
fire, or serious personal injury.

To reduce risk of damage to charger body and cord,
pull by charger plug rather than cord when discon-
necting charger. 

 Following this rule will reduce the risk

of electric shock, fire, or serious personal injury.

Make sure cord is located so that it will not be
stepped on, tripped over, or otherwise subjected to
damage or stress. 

Following this rule will reduce the

risk of serious personal injury.

Do not abuse cord. Never carry tool by cord or yank
it to disconnect from receptacle. Keep cord from
heat, oil and sharp edges. 

Following this rule will

reduce the risk of electric shock or fire.

An extension cord should not be used unless abso-
lutely necessary. 

  Use of improper extension cord

could result in a risk of fire and electric shock. If exten-
sion cord must be used, make sure:

a.  That pins on plug of extension cord are the

     same number, size and shape as those of
     plug on charger.

b.  That extension cord is properly wired and in

     good electrical condition; and

c.  That wire size is large enough for AC ampere

     rating of charger as specified below:

     Cord Length (Feet)

25'

50'

100'

     Cord Size (AWG)

16

16

16

     Note:

 AWG = American Wire Gage

Do not operate charger with a damaged cord or
plug. If damaged, have replaced immediately by a
qualified serviceman. 

Following this rule will reduce

the risk of electric shock, fire, or serious personal injury.

Do not operate charger if it has received a sharp
blow, been dropped, or otherwise damaged in any
way; take it to a qualified serviceman. 

Following this

rule will reduce the risk of electric shock, fire, or serious
personal injury.

Do not disassemble charger; take it to a qualified
serviceman when service or repair is required. In-
correct reassembly may result in a risk of electric
shock or fire. 

Following this rule will reduce the risk of

electric shock, fire, or serious personal injury.

To reduce the risk of electric shock, unplug charger
from outlet before attempting any maintenance or
cleaning. Turning off controls will not reduce this
risk. 

Following this rule will reduce the risk of electric

shock, fire, or serious personal injury.

Disconnect charger from power supply when not in
use. 

Following this rule will reduce the risk of electric

shock, fire, or serious personal injury.

Save these instructions. Refer to them frequently
and use them to instruct others who may use this
tool. If you loan someone this tool, loan them these
instructions also. 

Following this rule will reduce the

risk of electric shock, fire, or serious personal injury.

WARNING:

Some dust created by power sanding, sawing,
grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some ex-
amples of these chemicals are:

lead from lead-based paints,

crystalline silica from bricks and cement and
other masonry products, and

arsenic and chromium from chemically-treated
lumber.

Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.

Содержание OJ1802



















Отзывы: