Ryobi OCS1825, Оригинальное руководство пользователя

Страница: 19 / 20

PRODUCT SPECIFICATIONS
Cordless chainsaw
Model R18CHS12 / OCS1825
Rated voltage 18 V d.c.
No-load speed 3.6 m/s
Guide bar length 254 mm
Usable cutting length 160 mm (6.3 in.)
Chain pitch 9.5 mm (0.375 in.)
Chain guage 1.1 mm (0.043 in.)
Drive links quantity 40
Chain oil tank capacity 120 mL
Weight (without battery pack,
guide bar, chain, and oil)
2.18 kg
Vibration level (in accordance with EN 60745-1 & EN 60745-2-13)
Front handle 5.4 m/s
2
Rear handle 4.5 m/s
2
Uncertainty of measurement 1.5 m/s
2
Noise emission level (in accordance with EN 60745-1 & EN
60745-2-13)
A-weighted sound pressure level
at the operator’s position
79.6 dB(A)
Uncertainty of measurement 2.5 dB
A-weighted sound power level 89.9 dB(A)
Uncertainty of measurement 1.7 dB
BATTERY AND CHARGER
Model R18CHS12 OCS1825
Battery pack RB18L20A or
RB1820C
-
Weight 0.43 kg -
Charger RC18115
-
Compatible
battery packs
RB18L13, RB18L15, RB18L15A, RB18L15B,
RB18L20, RB18L20A, RB18L25, RB18L26,
RB18L40, RB18L40A, RB18L50, RB1820C,
RB1840C,
Compatible
chargers
BCL14181H, BCL14183H, BCL1418IV,
RC18150U, BCS618G, RC18115, RC18120,
RC18627U
REPLACEMENT PARTS (BAR AND CHAIN)
Manufacturer TRILINK
Chain CL14340PB
Bar M1431040-1041RY
The chain must be fitted with the bar from the same
manufacturer according to above combinations.
WARNING! The declared vibration total values and the
declared noise emission values given in this instruction
manual have been measured in accordance with a
standardised test and may be used to compare one tool with
another. They may be used for a preliminary assessment
of exposure.
The declared vibration and noise emission values represent
the main applications of the tool. However, if the tool is used
for different applications, used with different accessories,
or poorly maintained, the vibration and noise emission
may differ. These conditions may significantly increase the
exposure levels over the total working period. An estimation
of the level of exposure to vibration and noise should take
into account the times when the tool is turned off or when
it is running idle. These conditions may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and noise, such as maintaining
the tool and the accessories, keeping the hands warm (in
case of vibration), and organising work patterns.