Ryobi MHG-2000, Руководство по эксплуатации для владельца

Страница: 5 / 8

Voltage
Power input
Air flow
Temperature
I
II
III
Net weight 230V~50Hz
2000W
500L/min
50 °C
400 °C
600 °C
0.9kg
Check the following:
4
SPECIFICATIONS
DESCRIPTION
WHEN USING THE APPLIANCE
Replacing cables or plug
Using extension cables
Immediately switch off the appliance when:
ADDITIONAL SAFETY INSTRUCTIONS FOR
HEAT GUNS
BEFORE USING THE APPLIANCE
1. Make sure the voltage of the hot air gun corresponds
with the power voltage;
– Are the mains lead and the mains plug in a good state:
strong, without ravels or damages.
– Caution is advised when using long extension cables
2. Do not use the appliance under moist circumstances.
3. The metal mouthpiece gets hot. Watch out and do not
touch the metal mouthpiece.
4. Prevent damage of the heating element. Do not lock or
block the mouth piece.
5. Do not leave the appliance when switched on.
6. When in operation do not point the device at people or
animals.
7. Never look into the hot air nozzle.
8. Do not use this device in rain or damp surroundings, or
near explosive or flammable products.
9. Do not use the device on or near very dry spots to avoid
fire.
10. Always remove the plug from the socket when not
using the device, when replacing the nozzles or during
maintenance of the device.
11. Do not point the device at the same place for longer
periods of time.
12. Do not hold the device too close to the surface about
to be worked on as the device can overheat.
13. Pay attention to the direct / indirect workspace as the
heat can ignite flammable materials, which are close
by but not necessarily in view.
14. Do not allow the hot parts of the device to touch the
cord or other flammable materials.
15. The device should always be clean, dry and free of
grease and oil.
16. Do not use the appliance for purposes other than for
which it is intended.
1. If you are going to use the hot air gun, vapor and gas can
be released during a short time. This can be harmful for
your health. Asthmatics can suffer hindrance of it;
2. Before connecting the plug to the mains voltage you
have to check if the switch is in position “0”;
3. Keep the mains lead always away from the mouthpiece
of the hot air gun;
4. Keep children and animals away from the appliance if
you are using it.
5. Keep all parts of the body away from the metal heating
head. Do not touch it before it is cooled down.
6. Carry the appliance by the handle when the metal heating
head is cooled down.
7. Hold the appliance by insulated gripping surfaces only,
because the metal heating head may contact hidden
wiring or its own cord.
Plug and/or cable are defective or damaged;
The switch is defective;
You smell or see smoke caused by scorched insulation
from the hot air gun.
10. Stand
11. Weed killer nozzle
12. BBQ charcoal lighting nozzle
13. Hook nozzle
14. Flat nozzle
15. Glass protection nozzle
16. Concentration nozzle
17. Scraper
18. Chisel
1. Temperature adjustment lever
2. On / off switch
3. Hot air nozzle
4. Handle
5. Lock button for twisting handle
6. Extension handle grip
7. Extension handle tube
8. Lock button for extension handle
9. Cap
If the power cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified
person, in order to avoid a hazard.
Immediately throw away old cables or plugs when they have
been replaced by new ones. It is dangerous to insert the
plug of a loose cable in the wall outlet.
Only use an approved extension cable suitable for the
power input of the machine. The minimum conductor size is
1.5 mm
2
. When using a cable reel always unwind the reel
completely Inadequate extension cords can be dangerous. If
an extension cord is used, it shall be suitable for outdoor
use, and the connection has to be kept dry and off the
ground. It is recommended that this is accomplished by
means of a cord reel which keeps the socket at least 60 mm
above the ground.
This appliance operates at a temperature of 600 degrees
without visible signs of this temperature (no flames), still
there is a chance of fire risk. Watch out for the hot air stream
from the mouth piece. This air stream can cause burns.
WARNING!