Page 2
TABLE OF CONTENTS
Introduction ..................................................................................................................................................................... 2
General Safety Rules .................................................................................................................................................. 3-4
Specific Safety Rules ...................................................................................................................................................... 4
Symbols ........................................................................................................................................................................... 5
Electrical .......................................................................................................................................................................... 6
Features ...................................................................................................................................................................... 7-8
Adjustments .............................................................................................................................................................. 9-10
Operation ................................................................................................................................................................. 11-16
Maintenance ............................................................................................................................................................ 17-19
Accessories ................................................................................................................................................................... 19
Troubleshooting ............................................................................................................................................................ 20
Service Information ....................................................................................................................................................... 22
Spline joinery is one of the strongest methods of joinery used in woodworking. When glue is properly applied to a spline
and to the joint area of the wood pieces being connected, a large surface area receives the adhesion properties of the
glue. This forms a very strong joint.
Traditional spline joinery requires cutting slots with a router or table saw. Small, thin strips of wood must then be cut to fit
inside the slots and act as splines.
Newer methods of spline joinery use a plate or biscuit joiner to cut precise mating oval slots in adjoining boards. Your new
plate joiner is a fast, simple, and accurate plunge cutting tool that can be used for this purpose. It can be used to cut slots
in hardwood, softwood, plywood, particle board, and other pressed woods.
Football shaped wafers, called biscuits, are then placed inside the slots with glue and used to help line up adjoining
surfaces. When a water based glue is used, the biscuits swell in the joint, making an extremely strong and firm bond.
White glue, yellow glue, carpenters glue, hide glue, and aliphatic resin glue are examples of water based glues.This
bonding technique has traditionally been limited to making edge-to-edge joints. However, with the use of your new plate
joiner, biscuits can now be easily used to connect butt, miter, and T-joints. Biscuit joining can be as strong as mortise and
tenon, tongue and groove, standard spline, and doweled joints. In most cases the material around the biscuit will break
before the biscuit itself will break. A greater surface area is exposed to glue in a biscuit joint, making the seams stronger.
INTRODUCTION
The operation of any tool can result in foreign objects being thrown into your eyes, which can
result in severe eye damage. Before beginning operation, always wear safety goggles or safety
glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety
Mask for use over eyeglasses or standard safety glasses with side shields. Always wear eye
protection which is marked to comply with ANSI Z87.1.
WARNING:
Look for this symbol to point out important safety precautions. It
means attention!!! Your safety is involved.
WARNING:
Do not attempt to use this tool until you have read
thoroughly and understand completely the
operator's manual. Pay close attention to the safety
rules, including Dangers, Warnings, and Cautions.
If you use this tool properly and only for what it is
intended, you will enjoy years of safe, reliable
service.
Содержание JM81-1
Страница 21: ...Page 21 NOTES...
