8
ENGLISH (Original Instructions)
operation. You must attach and use the shoulder strap
and the brush cutter should be held at a comfortable
position with the trigger handle about hip height. Maintain
your grip and balance on both feet. Position yourself so
that you will not be drawn off balance by the kick-back
reaction of the cutting blade.
Exercise extreme caution when using the blade with this
unit. Blade thrust is the reaction which may occur when
the spinning blade contacts anything it cannot cut. This
contact may cause the blade to stop for an instant, and
suddenly "thrust" the unit away from the object that was
hit. This reaction can be violent enough to cause the
operator to lose control of the unit. Blade thrust may
occur without warning if the blade snags, stalls or binds.
This is more likely to occur in areas where it is difficult to
see the material being cut. For cutting ease and safety,
approach the weeds being cut from the right to the left.
In the event that an unexpected object or woody stock
is encountered, this could minimise the blade thrust
reaction.
CUTTING TECHNIQUE - BLADE
WARNING
Extreme care must be taken when using blades
to ensure safe operation. Read the safety
information for safe operation using the blade,
refer to "Specific Safety Rules for Brushcutter
and Blade Use" earlier in this manual.
■ If working in an area where there is a risk of falling
objects, head protection shall be worn.
■ Always hold brushcutter with both hands when
operating. Use a firm grip on both handles.
■ Maintain your grip and balance on both feet. Position
yourself so that you will not be drawn off balance by
the kick-back reaction of the cutting blade.
■ Inspect and clear the area of any hidden objects
such as glass, stones, concrete, fencing, wire, wood,
metal, etc.
■ Never use blades near footpaths, fencing, posts,
buildings or other immovable objects.
■ Never use a blade after hitting a hard object without
first inspecting it for damage. Do not use if any
damage is detected.
STARTING AND STOPPING
WARNING
Never start or run the engine inside a closed or
poorly ventilated area; breathing exhaust fumes
can kill.
TO START THE ENGINE
1. Lay the product on a flat, bare surface free of debris
2. Ensure the cutting blade is in a safe position.
3. Keep all body parts, particularly hands and feet away
from the cutter.
4. Start the engine.
5. Maintain complete control of the product whilst the
engine ir running.
TO STOP THE ENGINE
1. Release the throttle trigger.
2. Toggle the switch to the "O" (OFF) position.
■ The trigger and OFF switch are located next to the
operators right hand position on the power head.
■ Refer to the manual of your power head for more
detailed information.
WARNING
Do not, under any circumstance, use any
attachment or accessory on this product which
was not provided with the product, or identified
as appropriate for use with this product in the
Operator's Manual.
MAINTENANCE
WARNING
Use only original manufacturer's replacement
parts, accessories and attachments. Failure to
do so may cause poor performance, possible
injury and may void your warranty.
WARNING
When servicing, use only identical replacement
parts. Use of any other parts may create a
hazard or cause product damage.
WARNING
Always wear safety goggles or safety glasses
with side shields during power tool operation or
when blowing dust. If operation is dusty, also
wear a dust mask.
WARNING
Before inspecting, cleaning, or servicing the
machine, shut off engine, wait for all moving
parts to stop, and disconnect spark plug wire
and/or ensure the engine cut off switch remains
in the off position. Failure to follow these
instructions can result in serious personal injury
or property damage.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
You may make adjustments and repairs described in the