MAINTENANCE
1.
The tool must be switched off and unplugged before
making any maintenance of the accessories.
2.
Clean out all accumulated work dust after operation. The
air-vent of the tool should be cleaned regularly to avoid
overheating of the motor which is caused by the block
of the air-vent.
AFTER OPERATION
1.
Do not touch the moving part when the tool is just
switched off.
2.
Do not put down your tool before the working head stops
rotating.
3.
Hold the tool tightly and keep it a safe distance from
users.
Always point the bit away from your body. (See Fig. 6)
4.
Ensure that ventilation openings are kept clear when
working in dust conditions. If it is necessary to clear dust
of inside parts, disconnect the tool from the power supply
first and avoid damaging internal parts.
5.
Slow speed is best for polishing operations, delicate
woodcarving, or working on fragile model parts.
6.
High speed is suitable for operation on hardwoods,
metals and glass, such as: carving, routing, shaping,
cutting and drilling.
WARNING: Always remove the electric cord
from the power source before changing
grinding wheel, brushes, lubricating or when
working on the unit to avoid possible serious
injury.
WARNING: This electric tool is in accordance
with the relevant safety requirements. To
assure safety and reliability, all repairs should
performed by an Authorised Service Centre.
3.
DON’T clean the tool set with water, as no liquid is
allowed to drip into the tool body, clean the tool only
with a dry clean cloth.
4.
Keep handles dry, clean and free from oil and grease.
5.
DON’T allow petroleum based products to come into
contact with the plastic parts of the tool, as they contain
chemicals that can damage or destroy the plastic parts.
6.
Always keep saw blade, chisel, grinding wheel sharp.
7.
Inspect all mounting screws and ensure they are properly
tightened regularly.
8.
If anything improper happens during operation, the power
supply should be cut off at once. And the tool should be
checked and repaired by authorized Ryobi service
centre.
9.
When replacement is necessary, use original spare parts
from authorized Ryobi service centre.
10. Store the tool in a cool and well-ventilated area. Keep
the tool away from direct sunlight.
Fig. 6
