SWITCH
1.
To operate the tool, push switch trigger to “I” or “II”
positions.
To stop the tool, push switch trigger to “O” position.
2.
While pushing switch trigger to “II” position, it is the
highest speed. The running speed cannot be controlled
by “+” or “-” buttons. (See Fig. 1)
OPERATING THE TOOL
Follow these guidelines when operating the tool.
1.
Always allow the tool to operate as it was designed.
Never force the tool.
2.
Clamp or otherwise secure the work to prevent it from
shifting.
INSTALLATION BITS
1.
Unplug the tool.
2.
Depress and hold the spindle lock pin on the top of the
tool to stop the rotation of the motor.
3.
Turn the collet nut until the spindle lock pin engages the
hole in the shaft. (See Fig. 4)
3.
While pushing switch trigger to “I” position, you can
control the desired speed by adjusting the number shown
in the LCD display when pushing “+” or “-” buttons.(The
number ranges between 6 and 32)
4.
Accelerate the running speed by pushing “+” button.
Decelerate the running speed by pushing “-” button.
(See Fig. 2 & 3)
4.
Insert the bit into the collet to prevent the bit from coming
out of the tool while in use.
5.
Tighten the collet nut securely with wrench provided.
(See Fig. 5)
6.
Release the spindle lock pin.
Fig. 2
Fig. 3
Fig. 1
Fig. 4
Fig. 5
TO LOOSE
TO TIGHTEN
