manualshive.com logo in svg
background image

2

GENERAL SAFETY RULES

The purpose of safety rules is to attract your

attention to possible dangers. The safety symbols

and the explanations with them, require your

careful attention and understanding. The safety

warnings do not by themselves eliminate any

danger. The instruction or warnings they give are

not substitutes for proper accident prevention

measures.

SAFETY ALERT SYMBOL.

Indicates

caution or warning. May be used in

conjunction with other symbols or

pictures.

Failure to obey a safety warning can result in

serious injury to yourself or to others. Always follow

the safety precautions to reduce the risk of fire,

electric shock and personal injury.
Do not attempt to operate this tool until you have

read thoroughly and completely understood the

safety rules, etc. contained in this manual. Failure

to comply can result in accidents involving fire,

electric shock or serious personal injury. Save this

Owners Operating Manual and review it frequently

for continual safe operation and for instructing

others who may use this tool.

GENERAL REQUIREMENTS

1. The saw is specially designed for tree service,

i.e. for off-ground working in trees, and when

being used as such should only be used by

trained operators.

2. One handed operation of the saw can be

dangerous.

3. Be alert for the phenomena “skating” and

“bouncing”, greater risk from kickback.

4. Be cautious not to lose balance of your body

due to “drop” at the end of a cut.

5. If working off the ground the operator must be

trained in safe climbing techniques and use all

recommended safety equipment such as

harness, loops, strops, ropes and karabiners

for themselves and for the saw.

6. When hoisting a chain saw using a rope tied to

a lifting hook for operation on a tree, ensure

that the lifting hook is not strained by excessive

force.

PHYSICAL CONDITION

1. Do not operate a chain saw when you are tired

or under the influence of alcohol or drugs.

2. You should be in good physical and mental

health in order to handle your chain saw safely.

Errors in judgment or execution can be serious

or fatal. If you have any physical condition

which strenuous work could worsen, check with

your physician before using a chain saw. Do

not operate when ill or tired, or under the

influence of any substance or medication which

could affect your vision, dexterity or judgement.

PERSONAL PROTECTIVE EQUIPMENT (PPE)

1. Always wear approved goggles to protect your

eyes. Wood chips, dust, snapping branches

and other debris can be tossed by the cutting

chain into the operator’s facial area. Goggles

may also offer limited protection in the event of

the cutting chain hitting the operator in the eye

area. If conditions warrant that a ventilated face

shield should be worn, goggles must be worn

underneath it.

2. We recommend wearing hearing protection at

all times. If not followed, hearing loss can

occur. You should reduce the risk of hearing

damage by wearing either “headset” type

protectors or ear plugs which are approved by

an authorised organisation.

3. All persons who make part of their living using

chain saws should be tested periodically for

hearing deterioration.

The operation of any tool

can result in foreign objects

being thrown into your

eyes, which can result in

severe eye damage.

Before beginning power

tool operation, always wear safety goggles or

safety glasses with side shields and a full face

shield when needed. We recommend Wide

Vision Safety Mask for use over eye glasses or

standard safety glasses with side shields.

Due to continued product

refinement policy, product features

and specifications can and will

change without notice. Check

current features and specifications

with your retailer.

Содержание CS-4016




















Отзывы: