11
English
GB
D
E
I
P
NL
S
DK
N
GR
H
CZ
RUS
RO
FIN
FR
SLO
HR
TR
PL
OPERATION
KEYLESS CHUCK
See Figure 5.
Your drill has a keyless chuck. As the name implies,
you can hand tighten or release drill bits in the
chuck jaws. Rotate the chuck with your hand. Rotate
the chuck body with your other hand. The arrows on the
chuck indicate which direction to rotate the chuck body in
order to LOCK (tighten) or UNLOCK (release) the drill bit.
WARNING
Do not hold chuck body with one hand and use
power of the drill to tighten chuck jaws on drill bit.
Chuck body could slip in your hand or your hand
could slip and come in contact with rotating drill bit.
This could cause an accident resulting in serious
personal injury.
ADJUSTING THE SPEED
See Figure 6.
Follow these steps to adjust the speed.
■
For high speed: Slide the two-speed gear train switch
to “2”.
■
For low speed: Slide the two-speed gear train switch
to “1”.
Note:
If you have difficulty changing from one gear
range to the other, turn the chuck by hand until the gears
engage.
CAUTION
To prevent gear damage, always allow chuck to
come to a complete stop before changing the
speed or the direction of rotation.
MAINTENANCE
WARNING
When servicing, use only identical replacement
parts. Use of any other part may create a hazard
or cause product damage.
Avoid using solvents when cleaning plastic parts.
Most plastics are susceptible to damage from various
types of commercial solvents and may be damaged
by their use. Use clean cloths to remove dirt, dust, oil,
grease, etc.
WARNING
Do not at any time let brake fluids, gasoline,
petroleum-based products, penetrating oils,
etc. come in contact with plastic parts. They
contain chemicals that can damage, weaken or
destroy plastic.
Do not
abuse power tools. Abusive practices can damage
tool as well as workpiece.
WARNING
Do not attempt to modify this tool or create
accessories not recommended for use with
this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
as waste. The machine, accessories
and packaging should be sorted for en-
vironmental-friendly recycling.
960931157-01.indd 11
960931157-01.indd 11
7/10/07 10:45:09 AM
7/10/07 10:45:09 AM