Ryobi BPL3626D, Оригинальное руководство пользователя, Страница: 2 / 8

1
Safety, performance, and dependability have been given
top priority in the design of your battery pack.
SAFETY INSTRUCTIONS
Always mention the model number when communicating
with Ryobi in regards to battery packs. BPL3626D battery
pack is for Ryobi 36V cordless products only. Refer to the
Operator’s Manual provided with product.
WARNING
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock,
fi re and/or serious injury.
Save all warnings and instructions for future reference.
■
Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
when not using your battery tool or when changing
accessories.
Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
■
Do not place battery tools or their batteries near fire
or heat.
This will reduce the risk of possible injury.
■
Do not crush, drop or damage the battery pack. Do
not use a battery pack or charger that has been
dropped or received a sharp blow.
Properly dispose
of a dropped or damaged battery immediately.
■
Do not charge battery tool in a damp or wet location.
Following this rule will reduce the risk of electric shock.
■
For best results,
your battery tool should be charged in
a location where the temperature is more than 10°C but
less than 38°C. To reduce the risk of serious personal
injury, do not store outside or in vehicles.
■
Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in
contact with your skin, wash immediately with
soap and water, then neutralize with lemon juice
or vinegar. If liquid gets into your eyes, flush them
with clean water for at least 10 minutes, then seek
immediate medical attention.
Following this rule will
reduce the risk of serious personal injury.
■
Save these instructions.
Refer to them frequently and
use them to instruct others who may use this tool. If you
loan someone this tool, loan them these instructions
also to prevent misuse of the product and possible
injury.
BATTERY TOOL USE AND CARE
■
Recharge only with the charger specified by the
manufacturer.
A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
■
Use battery tools only with specifically designated
battery packs.
Use of any other battery packs may
create a risk of injury and fire.
■
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
■
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that
no batteries can come in contact with other batteries
or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps
or tape. Do not transport batteries that are cracked or
leaking. Check with the forwarding company for further
advice.
SPECIFICATIONS
Battery pack BPL3626D
Voltage 36 V
Compatible charger
(not included)
BCL3620
Battery capacity 2.6 Ah
Charger input 220V-240V, 50Hz
AC only
Maximum charging time
(BCL3620) 100 minutes
Quick recharge
60%
(60 minutes)
OPERATION
FUEL GAUGE
See figure
To display the amount of charge left in the battery, press
the fuel gauge button.
■ If four LEDs glow green, the battery pack is fully
charged. The battery pack capacity is between 75%-
100%.
■ If three LEDs glow green and one is off, the battery
pack capacity is between 50%-75%.
■ If two LEDs glow green and other two are off, the
battery pack capacity is between 25%-50%.
■ If only one LED glows green and others are off, the
battery pack capacity is lower than 25%. In this case,
the battery pack can be used as usual until automatically
turned off by the control program.
If only one LED glows green but battery pack can not
release power, the battery pack needs to be charged.