![background image](http://html.mh-extra.com/html/ryobi/airgrip-multitaskit-emm0001/airgrip-multitaskit-emm0001_operators-manual_1505027014.webp)
14
15
TROUBLESHOOTING
Problem
Possible Cause
Solution
Vacuum not running
Batteries are low
Power is turned off
Replace batteries.
Press on/off button.
Laser line projection is weak
Batteries are low
Replace batteries.
Laser line is hard to see
Light in area is too bright
Dim light in the work area or use
laser-enhancing glasses.
Light is not working
Power is not “on”
Batteries are low
Press the on/off button.
Replace batteries.
Laser line is not level
Leveling bubbles not properly aligned
Level is mounted on base that is not
level
Make sure bubbles are centered in
vials.
Make sure bubbles are centered in
vials after installing multi-function
base onto vacuum base.
Light is dim
Batteries are low
Replace batteries.
Magnetic tray isn’t holding items
Items are not placed on the magnet
Put items in the center of the tray
where magnets are located.
Magnetic tray is loose or won’t stay
in position
Handle isn’t tight
Rotate the height adjustment screw
clockwise to tighten.
Magnetic tray is too tight/won’t
move
Handle is tight
Rotate the height adjustment screw
counterclockwise to loosen.
Helping hand is loose
Screws not tight
Rotate the locking knob clockwise
to secure in position.
Vacuum base won’t stick to wall
Surface is incompatible for vacuum
Use rough-surface adaptor on
stucco and textured surfaces.
Содержание AIRgrip MultiTASKit EMM0001
Страница 15: ...15 NOTES ...