background image

28

Limited Two-Year Warranty

RYOBI AMERICA CORP. warrants each new RYOBI Product for two (2) years accord-
ing to the following terms.

This warranty extends to the original retail purchaser only and commences on the
date of original retail purchase.

Any part of the RYOBI Product manufactured or supplied by RYOBI and found in the
reasonable judgement of RYOBI to be defective in material or workmanship will be
repaired or replaced by an authorized RYOBI service dealer without charge for parts
and labor.

The RYOBI Product including any defective part must be returned to an authorized
service dealer within the warranty period. The expense of delivering the RYOBI
Product to the dealer for warranty work and the expense of returning it back to the
owner after repair or replacement will be paid for by the owner. RYOBI’s responsibil-
ity in respect to claims is limited to making  the required repairs or replacements and
no claim of breach of warranty shall be cause for cancellation or rescission of the
contract of sale of any RYOBI Product. Proof of purchase will be required by the
dealer to substantiate any warranty claim. All warranty work must be performed by
an authorized RYOBI service dealer.

This warranty is limited to ninety (90) days from the date of original retail purchase
for any RYOBI Product that is used for rental or commercial purposes, or any other
income-producing purpose.

This warranty does not cover any RYOBI Product that has been subject to misuse,
neglect, negligence, or accident, or that has been operated in any way contrary to
the operating instructions as specified in the RYOBI Operator’s Manual. This war-
ranty does not apply to any damage to the RYOBI Product that is the result of
improper maintenance or to any RYOBI Product that has been altered or modified so
as to adversely affect the products operation, performance or durability or that has
been altered or modified so as to change its intended use. The warranty does not
extend to repairs made necessary by normal wear or by the use of parts or acces-
sories which are either incompatible with the RYOBI Product or adversely affect its
operation, performance or durability. 

In addition, this warranty does not cover:
A. Tune-ups - Spark Plugs, Carburetor Adjustments, Filters
B. Wear items - Bump Knobs, Outer Spools, Cutting Line, Inner Reels, Starter Pulley,

Starter Ropes

RYOBI reserves the right to change or improve the design of any RYOBI Product

without assuming any obligation to modify any product previously manufactured.
ALL IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE TWO (2) YEAR
WARRANTY PERIOD OR NINETY (90) DAYS FOR PRODUCTS USED FOR ANY
COMMERCIAL PURPOSE. ACCORDINGLY, ANY SUCH IMPLIED WARRANTIES IN-
CLUDING MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR OTH-
ERWISE, ARE DISCLAIMED IN THEIR ENTIRETY AFTER THE EXPIRATION OF THE
APPROPRIATE TWO-YEAR OR NINETY DAY WARRANTY PERIOD. RYOBI’S OBLI-
GATION UNDER THIS WARRANTY, IS STRICTLY AND EXCLUSIVELY LIMITED TO
THE REPAIR OR REPLACEMENT OF DEFECTIVE PARTS, AND ROP DOES NOT
ASSUME OR AUTHORIZE ANYONE TO ASSUME FOR THEM ANY OTHER OBLIGA-
TION. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

RYOBI ASSUMES NO RESPONSIBILITY FOR INCIDENTAL, CONSEQUENTIAL OR
OTHER DAMAGES INCLUDING, BUT NOT LIMITED TO EXPENSE OF RETURNING
THE RYOBI  PRODUCT TO AN AUTHORIZED SERVICE DEALER AND EXPENSE OF
DELIVERING IT BACK TO THE OWNER, MECHANIC’S TRAVEL TIME, TELEPHONE
OR TELEGRAM CHARGES, RENTAL OF A LIKE PRODUCT DURING THE TIME
WARRANTY SERVICE IS BEING PERFORMED, TRAVEL, LOSS OR DAMAGE TO
PERSONAL PROPERTY, LOSS OF REVENUE, LOSS OF  USE OF THE PRODUCT,
LOSS OF TIME, OR INCONVENIENCE. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.

This warranty applies to all RYOBI Products manufactured by RYOBI and sold in the
United States and Canada.

To locate your nearest service dealer dial 1-800-345-8746 in the United States or 
1-800-265-6778 in Canada. 

RYOBI AMERICA CORP.

5201 Pearman Dairy Rd

Anderson, SC 29622-1207 U.S.A.

RYOBI CANADA INC.

275 Industrial Rd

Cambridge, Ontario NIR 6K2 CANADA

Содержание 990r





























Отзывы: