Ryobi 0200523, Оригинальное руководство пользователя

Страница: 6 / 24

ventilated place that is inaccessible
to children. Keep the product away
from corrosive agents, such as garden
chemicals and de-icing salts. Do not store
the product outdoors.
■ For transportation in a vehicle, secure the
product against movement or falling to
prevent injury to persons or damage to the
product.
TRANSPORTING LITHIUM BATTERIES
Transport the battery pack in accordance with
local and national provisions and regulations.
Follow all special requirements on packaging
and labelling when transporting batteries by a
third party. Ensure that no batteries can come
in contact with other batteries or conductive
materials while in transport by protecting
exposed connectors with insulating, non-
conductive caps or tape. Do not transport
battery packs that are cracked or leaking.
Check with the forwarding company for further
advice.
MAINTENANCE
WARNING
Use only original manufacturer’s
replacement parts, accessories, and
attachments. Failure to do so can cause
possible injury, can contribute to poor
performance, and may void your warranty.
WARNING
Servicing requires extreme care and
knowledge and should be performed only by
a qualified service technician. For service,
have the product serviced by an authorised
service centre only. When servicing, use
only identical replacement parts.
■ Do not make adjustments and repairs not
described in this manual. For other repairs,
contact an authorised service centre.
■ After each use, clean the product with a
soft, dry cloth.
■ Check all nuts, bolts, and screws at
frequent intervals for proper tightness to
ensure that the product is in safe working
condition. Any part that is damaged should
be properly repaired or replaced by an
authorised service centre.
■ Bring the product to an authorised service
centre to replace damaged or unreadable
labels.
CLEARING A BLOCKAGE
■ To reduce the risk of injury associated with
contacting rotating parts, always turn off
the product, remove the battery pack, and
make sure that all moving parts have come
to a complete stop.
■ Remove the tubes to inspect for blockage.
Clear the tubes if required.
■ Remove the debris collector bag. Check
that the bag adaptor is free from obstruction.
■ Inspect the opening to the fan enclosure
and the tube to the debris bag for evidence
of a blockage. Remember, even though
the battery pack is removed, the fan or
mulching blades may move as you clear
any blockage. Keep fingers away from the
fan or mulching blades at all times.
■ Do not attempt to remove the fan or
mulching blade. If it is necessary to remove
the fan or mulching blades, bring the
product to an authorised service centre.
■ Reinstall the tubes and the debris collector
bag before installing the battery pack and
starting the product.
RESIDUAL RISKS
Even when the product is used as prescribed,
it is still impossible to completely eliminate
certain residual risk factors. The following
hazards may arise during use, and the
operator should pay special attention to avoid
the following:
■ injury caused by vibration
–
Always use the right tool for the job, hold
the product by the designated handles
and use the lowest speed necessary to
achieve the task.
■ injury caused by exposure to noise
– Wear ear protection and limit exposure.
■ injury caused by flying objects from the
tube airflow
– Wear eye protection at all times.
4