Ryobi 0200523, Оригинальное руководство пользователя

Страница: 16 / 24

OPERATION
14
Vacuum setup
1
1
2
2
3
4
USING THE VACUUM
1. Slide the guide wheels under the lower
vacuum tube.
NOTE: Use the tab on the rear side to
slide the guide wheels and adjust its
position.
2. Insert the lower vacuum tube into the
upper vacuum tube until it snaps in
place.
3. Pull the locking pin, and insert the tube
assembly into the housing.
NOTE: Make sure that the locking pin is
inserted into the upper tube, locking the
tube assembly in place.
4. Turn the thumbscrew clockwise until it
snaps in place and is fully tightened.
NOTE: The product will not start if the
thumbscrew is not fully tightened.
WARNING: Never operate the
vacuum with only the upper vacuum
tube fitted. Failure to follow this warning
increases the risk of personal injury.