Fog & Stabilize engine:
1.
Add fuel stabilizer to the gas tank
2.
Run engine for 10 minutes to circulate.
3.
Turn off engine.
4.
Remove the air filter cover
5.
Start the engine
6.
Spray engine fogger into the air intake until you see heavy smoke and the engine stalls.
a.
If the engine does not stall on its own, turn the kill switch to off manually while spraying until the engine
completely stops
7.
Re-install the air filter
8.
Remove spark plug
9.
Pull the pull cord gently until the piston is near the bottom
10.
Spray engine fogging oil into the spark plug hole
11.
Turn the crank 2 full revolutions by pulling the pull cord gently this is to assure even coating on cylinder
wall.
12.
Replace the spark plug and spark plug wire
If possible, store equipment out of weather in a shed or garage.
If this is not possible, cover up with a tarp.
Store spare sealant in a place where it will not freeze.
Содержание RA-SSY-0002
Страница 2: ......
