RYNO MICRO-CYCLE, Руководство пользователя

Страница: 14 / 26

14
CAUTION
Make all seat adjustments to the Micro-Cycle when it is in Power off or in Standby State. Be sure the Micro-Cycle is secured, such as parked
on its parking bar or held by an assistant, when you make adjustments.
Before your first ride, adjust the following parameters to fit you.
• Seat height
• Seat tilt
It is essential for a RYNO that the rider’s center of gravity is also centered over the wheel. If the rider is off balance, when the rider puts the
bike into balance mode the bike will roll forward or backward making it hard to control. The rider can easily compensate for this condition by
leaning forward or back, but for optimum riding experience the rider’s spine should be in a straight upright riding position. To allow the rider
to sit this way the seat must be adjusted based on the rider’s weight distribution.
For heavy, tall riders, the seat should be at a higher setting with the seat tilted forward a bit. For light weight, short riders, the seat should be
at the lowest setting tilted a bit back.
The seat is adjusted properly when the rider is able to put their full weight on the seat while keeping the bike level (the battery doors
are horizontal).
While adjusting these parameters, be sure that the Micro-Cycle is upright and in balance mode when you put your full weight on the seat.
Adjusting seat height
Follow these steps to adjust the seat height.
1. Loosen the seat adjustment ring at the top of the shock absorber. This will
loosen the grip on the seat slide channel.
2. Move the seat up and down to find the right height. The right height lets
you place both feet flat on the ground (legs slightly bent) when seated.
CAUTION
For your safety, do not ride the Micro-Cycle unless you can put your feet flat on the ground when seated.
3. When the seat is at the right height, tighten the seat adjustment ring.
4. Check to make sure the seat adjustment ring is sufficiently tight prior to every ride.
Before You Ride
ADJUSTING YOUR MICRO-CYCLE
SEAT ADJUSTMENT RING